User Manual

6.6.1 IR CONTROL (AUTO, MANUAL)

• AUTO:TheIRintensityisautomaticallycontrolled.

• MANUAL:TheIRintensityiscontrolledaccordingtotheLINE-1ANDLINE-2threshold.

6.6.2 LINE-1, LINE-2 (Manual mode only)

ThisfunctionisusedtomanuallycontroltheintensityoftheIRLEDs.

• LINE-1:ControlstheoutermostringofLEDs.Setting0indicatedthattheLEDshave

beenturnedOFF,andsetting22indicatestheLEDsareatitsmostintense.

• LINE-2:ControlstheinnermostringofLEDs.Setting0indicatedthattheLEDshave

beenturnedOFF,andsetting22indicatestheLEDsareatitsmostintense.

6.6.3 SATURATION (6-15)

ThisfeaturedeterminesthresholdoftheIRilluminationintensitybeforeitautomatically

compensatesfortheoverexposure.Higherthevalue,lesserthetoleranceitwillhave

beforecompensation.

6.6.4 MIN. LEVEL (1-10)

ThisfeaturesetstheminimumIRilluminationintensity.Forbestresult,observethediffer-

encechangingthevaluemakeswhileviewingtheeffectsontheservicemonitor.

OSD Menu Terms & Settings

IR CONTROL

LINE-1

LINE-2

SATURATION

MIN. LEVEL

RETURN

SAVE & EXIT

IR LED SETUP

AUTO