User Manual

29
6. DAY/NIGHT (Models equipped with Day/Night only)
The Day/Night Setup is used to control the MODE, SENSING, DELAY TIME,
DAYaNIGHT, NIGHTaDAY, and the IR LED SETUP of the EasyView™ 2 dome
camera.
6.1 MODE (AUTO, COLOR, B/W)
Thisfunctionisusedtocontrolthecolorsettingduringdaytimeandnight-timeoperation.
• AUTO: ThecolormodeisoperatedduringdaytimeandautomaticallyconvertstoB/W
modeintheabsenceofadequatelightingduringnight-time.
• COLOR: Thecameraisalwaysincolormodeevenduringnight-timeoperation.
• BW: ThecameraisalwaysinBW(blackandwhite)mode.
6.2 SENSING (CDS, OPD)
The‘SENSING’optionallowstheusertochoosebetweenthe‘CDS’andthe‘OPD’sens-
ingmodes.
• CDS:ThecamerareliesontheCDSsensortodetectthelightlevels,thentriggersthe
IRcut-ltermovement.
• OPD(OpticalDetector):TheOPDblockdetectsthecolorandbrightnessbasedonthe
screeninformation,thentriggerstheIRcut-ltermovement.
OSD Menu Terms & Settings