User Manual

28
5.3 PRIVACY MASK
The‘PrivacyMask’isusedtomaskspecicareaswithintheframeofthecameratobe
concealed.Atotalof4areascanbemasked.
To setup the Privacy Zone masks, follow the simple instructions below.
1. SelecttheMASKNO.(1-4),thenenablethemaskbyturningtheDISPLAYto‘ON.’
2. Selectthecolorortypeofmask.Thedifferentlettersrepresentsadifferentcolormask
withtheexceptionofthe‘MOSAIC’mask,whichobscurestheselectedarea.
3. ScrolldowntotheEDITAREAtodenetheunwantedarea(s).
OSD Menu Terms & Settings
MASK NO.
DISPLAY
MASK TYPE
EDIT AREA
RETURN
SAVE & EXIT
PRIVACY SETUP
01
OFF
A TYPE
MENU:SELECT MODE SIZE
SELECT MODE
ADJUST MASK SIZE
MOVE MASK
SAVE & EXIT
4. Usingthedirectionalarrowkeys,makethe
maskbiggerorsmallerenoughtomaskover
theentireunwantedarea.Oncethesizehas
beenadjusted,pressthe[SET]key.
5. ScrolldowntoMOVEMASK,thenpressthe
[u]rightkeytomovethemask.
6. ‘SAVE&EXIT’andrepeatsteps1-5asmany
timesasnecessarytomaskupto4areasof
thescreen.