User Manual

22
OSD Menu Terms & Settings
2. WB SETUP (White Balance)
The WB Setup is used to control the white balance under different illumination
sources. Adjust this setting to calibrate the camera for correct color rendering.
2.1 MODE (ATW-OUTDOOR, OUTDOOR, INDOOR, FLUORESCENT, HOLD, MANUAL,
ANTI-ROLLING, ATW-INDOOR)
• ATW-OUTDOOR(AutomaticTrackingWhiteBalance):ATWmodemonitorsthecolor
changesandautomaticallyadjuststheredandbluevalueswithinasetparameter.The
‘ATW-OUTDOOR’modeissuitableforalloutdoorapplications.
• OUTDOOR:Fixedat5400°K
• INDOOR:Fixedat3200°K
• FLUORESCENT:Suitableforenvironmentwithuorescentlighting.
• HOLD:Fixedatcurrentlightingenvironment.Referto2.2CONTROL.
• MANUAL:Selectthe‘MANUAL’modetoadjusttheredorbluecolorvaluesmanually.
• ANTI-ROLLING:Settothismodeifcolorrollingisobserved.Thismodesuppressesthe
colorrolling.
• ATW-INDOOR(AutomaticTrackingWhiteBalance):ATWmodemonitorsthecolor
changesandautomaticallyadjuststheredandbluevalueswithinasetparameter.The
‘ATW-INDOOR’modeissuitableforallindoorapplications.
Note: ATW mode is recommended for most environments. The factory default is set to
‘ATW-OUTDOOR.’
MODE
CONTROL
RED
BLUE
RETURN
SAVE & EXIT
WB SETUP
ATW-OUTDOOR
----
- -
- -