User Manual

13
Base Installations
1. Removethedomecoverbylooseningthe3screwslocatedattheDomeCover
Ring.EasyView™2indoordomesusethestandardphilipsscrews,whilevandal
domesusesthetorxscrews.UsetheTorxWrenchsupplied.
2. Surface Mount-UsingfourST4x30screwsprovided,mountthesurfacemount
platetoasturdysurface.UsingthreeST4x12(Indoor)screws,orM4x10(Vandal-
proof)screws,afxushmountbasetothesurfacemountplate.
3. Flush Mount-UsingfourST4x30screwssupplied,mountthesurfacemount
platetoasturdysurface.
Flush MountSurface Mount
PhilipsM4X9or
TroxM4X9
ST4X12orM4X10
ST4X30
ST4X30
PlasticAnchors
Surface Mount Template
Flush Mount Template