Installation Guide

RESIDENTIAL INSTALLATION INSTRUCTIONS
FLOATING * STAPLE-DOWN * GLUE-DOWN
V.070417
For further technical or installation questions or to request Product Specification Data Sheet
you may contact the manufacturer at 561-804-1711
CAUTION: WOOD DUST
The International Agency for Research on Cancer has classified wood dust as a nasal carcinogen.
The sawing, sanding, and/ or machining of wood products can produce wood dust that can cause respiratory, eye, and skin irritations.
Equipment should be equipped with a dust collector to reduce airborne wood dust.
Wear an appropriate NIOSH designated dust mask to reduce exposure to airborne wood dust. Avoid contact with eyes and skin. In case
of irritation, flush eyes or skin with water for at least 15 minutes. In cases of severe irritation; seek immediate medical attention.
For further technical or installation questions or to request Product Specification Data Sheet you may contact the manufacturer at
561-804-1711
Attention California Installers & Consumers
WARNING
Installation of this product and any wood product may
create wood dust, which is known to the State of California to cause cancer.
NUVELLELOCK®offers in house technical support as a courtesy to our customers. Consult with one of our
Flooring experts to find answers to your specific installation questions unique to your application. Contact us by email:
[e-mail] ; or by phone: [phone]
Determine the best installation method that suits your application. NUVELLELOCK® floors may be Floated (not
secured to the subfloor), Glued, or Stapled. Follow the instructions designated for the most suitable installation
method for your project.
NUVELLELOCK® TECHNOLOGY FEATURES BUILT-IN EXPANSION SPACE BETWEEN BOARDS
• To allow the boards to slide easily into position, the locking system is coated with a paraffin wax.
• To allow the floor to remain flat, while it naturally expands and contracts, the locking system is designed with a built-in
expansion space between the assembled boards, up to 1/25” (1mm) and will not affect the performance or structural
integrity of your wood floor.
• When installing with the floating installation method the boards will have movement, this is normal and allows the floor to
remain flat as it naturally expands and contracts.
To allow the floor to
remain flat, the locking
system is designed with
a built-in expansion
space between the
assembled boards
1/25”(1mm) in width.
To allow the boards to
slide easily into
position, the locking
system is coated with a
paraffin wax.