User manual

20
Auto-test
N1 peforms an automatic test of correct opeation at predetermined
time intevals, emitting a green light signal if there are no opeating
anomalies or presence of pollutants.
If desired, you can turn off the green light signaling through the App. In
case of detection of pollutants in the monitored area, N1 will however
emit the WARNING or DANGER alarm signal, depending on the level
found. For your safety, it is not possible to disable them via the App.
Moreover, if the test results indicate opeating anomalies such as, for
example, problems with Wi-Fi connection, battey, sensors, etc., N1 will
emit a light blue lashing signal.
3