Trusted Video Management SCB-A08 User Manual Ver. 1.0.131218.
Trusted Video Management NUUO Surveillance System - Accessory TABLE OF CONTENTS TABLE OF CONTENTS ............................................................................................................................. 1 1. INTRODUCTION .............................................................................................................................. 2 1.1.Key Features ...........................................................................................................................
Trusted Video Management NUUO Surveillance System - Accessory 1. Introduction SCB-A08 is an I/O box to intermediate the communication between a surveillance server and multiple peripherals. It joins up all the major components in your surveillance network to deliver your prospective management and protection over your property. This manual combs the hardware/software setup for SCB-A08. Software-wise A08 needs the server relies on NUUO surveillance system, to bring all the peripherals under control.
Trusted Video Management NUUO Surveillance System - Accessory 1.1.Key Features - 8 inputs (dry contact or wet contact) and 8 relay outputs provided. Supports 10/100 Mbps Ethernet. Status LED for each channels. DIN rail (optional). Supports LAN and WAN communications. In server mode supports individual 8 client sessions (socket). Management access password protected. Supports socket connection, TCP server, TCP client and UDP.
Trusted Video Management NUUO Surveillance System - Accessory 1.2. OS Requirement 32 bits MS Windows XP / Vista / Win 7 64 bits Win 7 / Win 8 / Win Server 2008 R2 / Win Server 2012 1.3. System Requirement The new SCB-A08 IO box can be installed in Mainconsole v5.0, NVRmini 2 v2.0, NVRsolo v2.0 and Crystal Titan 2.1 or above. 1.4.
Trusted Video Management NUUO Surveillance System - Accessory 2. Overview To apply SCB-A08 to your surveillance system, get to know it first. Take a look around SCB-A08. The illustration below depicts SCB-A08 by top view and side view, with all major components and dimensions called out. Fig. 1. Overview Fig. 2.
Trusted Video Management NUUO Surveillance System - Accessory Fig. 3. Pin Terminal block Pin RS232 1 RS422 RS485 RXD(+) 2 RXD RXD(-) 3 TXD TXD(+) D(+) TXD(-) D(-) GND GND 4 5 GND Fig. 4.
Trusted Video Management NUUO Surveillance System - Accessory 2.1.
Trusted Video Management NUUO Surveillance System - Accessory 2.2.
Trusted Video Management NUUO Surveillance System - Accessory GND Ground 2.3. Digital I/O Hardware Connection SCB-A08 bottom has eight switches to set Dry Contact and Wet Contact 2.3.1 Digital Input A. Digital Input Dry contact B.
Trusted Video Management NUUO Surveillance System - Accessory 2.3.2 Digital Output When Relay turn on, DO and CO will be a circuit A. AC source B.
Trusted Video Management NUUO Surveillance System - Accessory 3. Network Deployment Diagram This diagram shows how server and all in one I/O box A08 are deployed within the surveillance network to work. Fig. 3. Network Deployment Diagram 4. Hardware Setup This chapter combs through the necessary setup for the major components in the surveillance network including: 1. 2. I/O box SCB-A08, Windows-based server PC. 4.1.
Trusted Video Management NUUO Surveillance System - Accessory Step 3: Select Next when the SCB-A08 Setup window appears. Step 4: In the Choose Destination Location window select Next to install the search tool in the default location. Select Browse to install into a user selected directory. The installation progress will be shown into complete. Step 5: Select Finish when the Install Shield Wizard Complete screen appears.
Trusted Video Management NUUO Surveillance System - Accessory 5. Using Search Tool This chapter introduces several functions of search tool: - Searching for SCB-A08 connected to the network - Displaying and changing the configuration of SCB-A08 - Upgrading the SCB-A08 firmware - Monitoring port status - Saving and loading configuration files Once the SCB-A08 is connected to LAN, the search tool will be able to search LAN for all connected SCB-A08 and will display them in a window by name and IP address. 5.
Trusted Video Management NUUO Surveillance System - Accessory 5.3. Server Properties Step 1: Double click SCB-A08 list on SCB Manager search tool and open server properties. - Server name: The server name is user configurable. It is recommended users with more than one SCB-A08 connected to the LAN assign a new name to each. When the Manager software searches for SCB-A08 on the LAN it will display the server name allowing the user to distinguish between SCB-A08s.
Trusted Video Management NUUO Surveillance System - Accessory specified port. Before changing ports, any change to properties must be Updated (Saved) or SCB-A08 will not retain them. Suggest use default setting. - Baud rate: The serial port baud rate on SCB-A08 must match the serial baud rate of the connected device. (Suggest use default setting) - Data/Parity/Stop: This setting will have to match the data format of the connected device.
Trusted Video Management NUUO Surveillance System - Accessory Console – When this mode is selected and the server is updated, a PC running a communication program such as Hyperterminal can communicate with the serial server via the Console Mode serial port (Port 1 on SCB-A08), displaying the Server Properties screen and allowing configuration of the server and its ports.
Trusted Video Management NUUO Surveillance System - Accessory 5.3.1 Default Value Model SCB-A08 Server Name SCB-A08 Password -- DHCP Disable IP Address 192.168.2.1 Netmesk 255.255.255.0 Gateway 192.168.1.
Trusted Video Management NUUO Surveillance System - Accessory 5.4. Web Server Interface The Web Server interface provides the same updating options as Console Mode and Telnet. These are located at the bottom of all three Web Server pages. If a field is changed, you must click Save before leaving that page or the changes will be ignored.
Trusted Video Management NUUO Surveillance System - Accessory 5.5. Upgrading Firmware New firmware may be available at times on www.nuuo.com > Download and may downloaded and flashed to SCB-A08 currently in use. The user can upgrade using a direct connection to SCB-A08 serial port. Step 1: Download the new upgrade .hex file from www.nuuo.com > Download and place in a folder. Step 2: Ensure that the DIP switches are all in the OFF position. Step 3: Connect a null modem cable between the PC and SCB-A08.
Trusted Video Management NUUO Surveillance System - Accessory 5.6. Configuration Here we take NUUO surveillance system—Mainconsole for example: Step 1: Open Mainconsole on PC. Step 2: From Mainconsole tool bar, click button. Step 3: A menu opens. Step 4: Click Setting > System Setting. Step 5: Setting page opens featuring a series of tabs. Step 6: Click I/O Device tab. I/O Device tabbed page opens.
Trusted Video Management NUUO Surveillance System - Accessory Step 7: In Module field, dub SCB-A08 with a name. Step 8: By Device, specify SCB-A08 model name. Step 9: By Port, enter 4001 for I/O. Step 10: By ID, select the ID address for SCB-A08. Note: First device selects Addr:01 and so on. Step 11: Run test. If the window detect IO box successfully pop up, the setup is successfully made. Step 12: Click OK and quit setting.
