Central Management System Software Installation Guide Ver. 1.5.0.101115.
NUUO Central Management System Table of Contents Table of Contents Table of Contents ............................................................................................................................................................ ii System Introduction ....................................................................................................................................................... 3 Client/Server Architecture..................................................................
System Introduction The NUUO Central Management System (NCS) is a powerful system which brings traditional central management systems out of the control room through Internet access. The network-based key operation system can manage unlimited combinations of analog and network cameras worldwide, via unlimited working stations in different locations. NCS is the universal solution for large scale projects.
NUUO Central Management System System Requirements System Requirements System Setup There are three scenarios for NCS system setup. Depending on customers’ budget and the size of the project, customers can choose a suitable scenario. The system requirements for each scenario are detailed below.
NUUO Central Management System Table of Contents Scenario C: Using four PCs with NCS Client and NCS Matrix on PC1, NCS Server on PC2, SQL Server on PC3, and NCS Matrix on PC4 PC1 PC2 PC3 PC4 CPU Intel Core 2 Quad Q6660 @ 2400MHz Intel Core 2 Duo E4500 Intel Core 2 Duo E4500 Intel Core 2 Quad Q6660 @ 2400MHz RAM 2 GB 1 GB 1 GB 2 GB Hard Disk 250 GB or above 250 GB or above 250 GB or above 250 GB or above Display ATi X4350 or above Mother-board ATi X1600 or above ATi X1600 or above ATi
NUUO Central Management System Installation Installation The NCS Installation CD contains the software you need to run the complete NCS system. If you are installing the system on multiple PCs as described earlier, install the appropriate software for each PC: For the PC running SQL Server, install SQL Server 2005 Express. For the central server PC, install NCS Server For client PCs, install NCS Client For PCs displaying video matrixes, install NCS Matrix.
NUUO Central Management System Table of Contents 4. In the Installing Prerequisites dialog box, click Install to continue update, and then click Next to continue installation. 5. In the Welcome to the Microsoft SQL Server Installation Wizard dialog box, click Next to install. 6. In the System Configuration Check dialog box, click Next. 7. In the Registration Information dialog box, enter your name and company, and then click Next.
NUUO Central Management System Installation 8. In the Feature Selection dialog box, select Database Services, and then click Next. 9. In the Authentication Mode dialog box, enable Mixed Mode option, and then enter and confirm a password. 10. In the Configuration Options dialog box, select Enable User Instances option, and then click Next. 11. In the Error and Usage Report Settings dialog box, you do not need to select any option. Click Next.
NUUO Central Management System Table of Contents 12. In the Ready to install dialog box, click Install. 13. In the Setup Progress dialog box, wait for installation finish, and then click Next. 14. In the Completing Microsoft SQL Server 2005 Setup dialog box, click Finish NCS Server To install NCS Alarm Server: 1. Insert the NCS installation CD.
NUUO Central Management System Installation 2. In the Welcome to NCS window, click NCS Server. 3. In the InstallShield Wizard dialog box, click Next to continuous. 4. In the License Agreement window, read the terms, select I accept the terms of the license agreement, and then click Next. 5. In the Customer Information window, enter your name and company, and then click Next.
NUUO Central Management System Table of Contents 6. In the Setup Type window, select Complete, and then click Next. 7. In the InstallShield Wizard window, click Next. 8. Please click Yes to install SQL Native Client program. 9. In the InstallShield Wizard Complete dialog box, click Finish. NCS Client To install NCS Client (include Matrix): 1. Insert the NCS installation CD.
NUUO Central Management System Installation 2. In the Welcome to NCS window, click NCS Client. 3. Complete installation as described in steps 3-7 of the 4. In the InstallShield Wizard Complete dialog box, click Finish. To install NCS Alarm Server section on page 9. NCS Matrix To install NCS Matrix: 1. Insert the NCS installation CD. 2. In the Welcome to NCS window, click NCS Matrix. 3. Complete installation as described in steps 3-4 of the To install NCS Client section on page 11.
NUUO Central Management System Table of Contents Uninstalling NCS System To uninstall SQL Server: In the Control Panel, open Add or Remove Programs, select and click on Remove button to uninstall four SQL objects (Microsoft SQL Sever 2005, Native Client, Setup Support Files, VSS Writer). To uninstall the NCS system: In the Start menu, point to All programs, point to NUUO Central Management Server/Client/Matrix, and then click Uninstall NCS System.
NUUO Central Management System Getting Started with the NCS System Getting Started with the NCS System Main Console Configuration To configure the Main Console: 1. Run MainConsole.exe. 2. In Config, select Network Service, and set up the following services: Live Streaming and Central Management. These services are essential to run the NCS system. Please Start these two services. Remote Playback. This service enables recorded video viewing and remote playback.
NUUO Central Management System Table of Contents 2. In the SQL Server Configuration Manager window, select Protocols for CMALARMLOG, right-click TCP/IP and then select Enable to enable TCP/IP protocol. 3. Double-click TCP/IP, then in the TCP/IP Properties window select the IP Addresses tab. 4. Enter 1433 as the TCP port in IP1, IP2, and IPAll, and then click OK. 5.
NUUO Central Management System Getting Started with the NCS System 3. The configuration of NCS Alarm Server. In the Configuration tab of Central Server window, enter the IP address of the SQL Server, and then enter and confirm the password which sat when installed SQL Server. (see page 8) Specify a URL at which to store all alarm images. Select Run NCS Server when Windows starts up if you want NCS Server to startup automatically at Windows startup 4.
NUUO Central Management System Table of Contents 2. In the NCS Client Setting window, select Enable Auto Startup and Enable Auto Login 3. Enter a user account and, if required, a password. 4. Click OK. NCS Matrix To execute a single matrix display: 1. In the Start menu, point to All Programs, then point to NUUO Central Management Client or NUUO Central Management Matrix, and click NCS Matrix. To configure the first matrix in a multiple matrix system: 2.
NUUO Central Management System Getting Started with the NCS System 4. To configure a third and a fourth monitor, repeat steps 1-3 naming the matrix instances as appropriate (for example monitor3, monitor4), entering the port number (5230 for a third monitor and 5240 for a fourth), and selecting the appropriate monitor. 5. Click OK to save all configuration of Matrix. To execute a matrix in a multiple matrix system: 1. 2. Ensure that the matrixes have been configured as described above.
NUUO Central Management System Table of Contents 3. Click Yes in the confirmation window. Edit Device Indicators An indicator image can be rotated, mirrored, or changed. The image can also be set to refer to a different device than the one originally chosen. To rotate a device indicator to a preset angle: Once a device indicator has been added or dragged to a map, the indicator image can be rotated. This is useful to show which direction a camera is pointing. 1.
NUUO Central Management System Getting Started with the NCS System To remove a device indicator from a map: 1. Right-click the indicator or right-click the device form MapView. 2. Click Delete. 3. Click Yes in the confirmation window.
NUUO Central Management System Table of Contents Cross Time Zone Scenario The NCS System is easy to use across multiple time zones. The NCS Server and the SQL database record all alarm times in UTC (Coordinated Universal Time). This enables the NCS Server to put the alarms in order before they are sent to the NCS Client. The NCS Client converts the alarm times to the local time, to enable users to manage alarms efficiently.
