Quick Start Guide

Follow these step-by-step instructions to set up your F1.
Power off the phone and remove battery before inserting
any cards!
Warning: SIM cards are small enough to become a
choking hazard, so please keep them away from children.
SIM cards are also quite delicate. Please be careful when
handling your card.
Remove the back cover by sliding
the back cover down with your
fingers.
Power off the phone and remove
battery before inserting memory
card.
After installing the SIM card, memory
card, and battery, align the cover and slide it
closed. Make sure you press all around the
edge to ensure a secure fit.
Plug in the microUSB connector to charge
the phone or transfer data.
Orient SIM card to match diagram on slot.
SIM 1 supports GSM connections.
SIM 2 supports GSM connections.
Align the battery contacts, then insert the
battery contact-first.
Remove Back Cover
Insert microSD
™
Memory Card
Replace Back Cover
Charge/Sync
Insert SIM (Dual SIM Standby)
Insert the Battery