Instructions / Assembly

Thanks for purchasing and trusting NUUGARDEN with your home deco-
rating plans. This product is a furniture designed and made by
NUUGARDEN Corp.
We are committed to R&D innovation and to create the most refined,
diverse choice of outdoor collection.
After unpacking and before every use, check whether the item shows
any damages. In addition, check that you have all parts and hardwares
before assembly. If there is any damage, please do not use and just call
customer service at [phone] or send an email to service@nu-
ugarden.com. If you do not have all the parts lists, have your dealer
contact us and they will be sent to you immediately.
This furniture is intended for indoor and outdoor use. Please take time to
read and follow the instruction below. Use the item as described in this
operating manual.We accept no liability for damages caused by improp-
er use.
INTRODUCTION
1
Part
Number
Images
Sizes
Qty.
and
A
A
B
B
C
C
D
D
E
1
1
1
11
F 11
M6*ø15
M6*40
ASSEMBLY INSTRUCTIONS
Step1: Attach the backrest (A) to the chair seat (B) using 3 bolts (F)and
3 washers (E).
Step2:Attach the left and right arm (C,D) to the chair body using 4 bolts
(F) and 4 washers (E).
Note:Please do not tighten any bolt until all bolts have been put into right
place.
If you tighten one bolt, it maybe cause other bolts out of position.
43