Instructions / Assembly

Note: Please only tighten any bolts once all bolts place correctly and the product is lying flat.
If you tighten one bolt, it may cause other bolts to get out of position.
CAVEAT
Attach the 2pcs of tabletop (A) using 2 washers (M), 2 screws (K) with an Allen wrench
(N), then using 2 washers (M), 2 nuts (L) with the wrench (O) to connect the tabletop.
Finally, use an Allen wrench and wrench to tighten the screws in the opposite direction.
Do not over-tighten.
3
ASSEMBLY INSTRUCTIONS
STEP 1
K
M
N
M
L
O
A