Instructions / Assembly

Note:Please do not tighten any bolt until all bolts have been put into right place.

If you tighten one bolt, it maybe cause other bolts out of position.

Attach fix ring (C) together using 8 washers (F) and 8 bolts(E), Do not screw down.

Upon completion of full assembly and bolted up-all screws can be tightened down.

Note:Please do not tighten any bolt until all bolts have been put into right place.

If you tighten one bolt, it maybe cause other bolts out of position.

Attach 4 legs (B) to table top (A) using 8 washers (F) and 8 bolts(D). Do not screw down.

3 4

Note:Please do not tighten any bolt until all bolts have been put into right place.

If you tighten one bolt, it maybe cause other bolts out of position.