Use and Care Manual

Note: Please only tighten any bolt once all bolts are placed correctly.

If you tighten one bolt, it may cause other bolts to get out of position.

CAVEAT

Attach the 3 legs (C) to the tabletop (A) using studs(D), washers (E), and nuts (F, G).

Do not over-tighten.

Attach the 3 legs (C) to the legs support (B) using bolts (H), washers (E), and nuts (F,

G). Do not over-tighten.

Upon completing the entire assembly and bolting up, you can tighten down all screws.

ASSEMBLY INSTRUCTIONS

STEP 1