Use and Care Manual

Note: Please only tighten any bolt once all bolts are placed correctly.

If you tighten one bolt, it may cause other bolts to get out of position.

CAVEAT

Attach the right and left arm (D, E) using bolts (F), washers (G), and nuts (H, I). Then

attach them to the backrest (A) and chair seat (B). Do not over-tighten.

Upon completion of the entire assembly and bolted up-all screws, you can be tightened

down all screws. Next, add the protect hats (M).

ASSEMBLY INSTRUCTIONS

STEP 2