Instructions / Assembly

ASSEMBLY INSTRUCTIONS

Step 1: Attach the front and back Legs (C,D) to the studs on the chair

seat (B) using washers and nuts (L,M,N).Do not tighten the nuts.

Step2: Attach the backrest (A) to the chair seat (B) using washers and

nuts (L,M,N).Do not over tighten.

Step3: Attach the right and left arm(E,F) using the bolts (K) and washers

and nuts (H,I,J).Do not over tighten .

Step4: Attach the right and left arm(E,F) using the bolts (G) and washers

,nuts (H,I,J) .Do not over tighten.

Step5: Upon completion of full assembly and bolted up-all screws can be

tightened down. Add the protect hats (O,P).

Note:Please do not tighten any bolt until all bolts have been put into right

place.

If you tighten one bolt, it maybe cause other bolts out of position.

1 2

Thanks for purchasing and trusting NUUGARDEN with your home deco-

rating plans. This product is a furniture designed and made by

NUUGARDEN Corp.

We are committed to R&D innovation and to create the most refined,

diverse choice of outdoor collection.

After unpacking and before every use, check whether the item shows

any damages. In addition, check that you have all parts and hardwares

before assembly. If there is any damage, please do not use and just call

customer service at (800) 257-7108 or send an email to service@nu-

ugarden.com. If you do not have all the parts lists, have your dealer

This furniture is intended for indoor and outdoor use. Please take time to

read and follow the instruction below. Use the item as described in this

operating manual.We accept no liability for damages caused by improp-

er use.

INTRODUCTION