Use and Care Manual

ASSEMBLY INSTRUCTIONS
Step1: Attach 1 back frame(A) to 1 seat frame(B) using 1 bolt (G), 1 washer(H). Attach
back frame(A) to left armrest (D) using 1 bolt(G), 1 washer (H). Attach seat frame(B) to
left armrest (D) using 1 bolt(E), 1 bolt (F), 1 washer(H). Do not over tighten.
Step2: Attach back frame(A) of step1 to right armrest(C) using 1 bolt(G), 1 washer(H).
Attach seat frame(B) to right armrest(C) using 1 bolt(E), 1 bolt(F), 1 washer(H). Do not
over tighten.
Step3: Upon completion of full assembly and bolted up-all screws can be tightened
down.
Note:Please do not tighten any bolt until all bolts have been put into right place.
If you tighten one bolt, it maybe cause other bolts out of position.
1 2