Instructions / Assembly

Note: Please only tighten any bolt once all bolts are placed correctly.

If you tighten one bolt, it may cause other bolts to get out of position.

CAVEAT

Attach the 4 legs (A) to the tabletop (C), using 4 nuts (H), 4 spring washers (G), and 4

washers (F) with the wrench (D). Do not over-tighten the screws. The legs with regulator

make it in good balance.

Upon completing the entire assembly and bolting up, you can tighten down all screws.

ASSEMBLY INSTRUCTIONS

STEP 6