INSTRUCTION MANUAL Cast Aluminum Round Dining Table With Ice Bucket Function CT005BP
INTRODUCTION Thanks for purchasing and trusting NUUGARDEN with your home decorating plans. This product is a piece of furniture designed and made by NUUGARDEN Corp. We are committed to R&D and innovation and creating the most exquisite and diverse outdoor series. After unpacking and before every use, check whether the item shows any damage. In addition, check that you have all parts and hardware before assembly.
Part Number It's two different sides to this part. Pay attention to installing this part. Images and Sizes Qty.
ASSEMBLY INSTRUCTIONS CAVEAT Note: Please only tighten any bolt once all bolts are placed correctly. If you tighten one bolt, it may cause other bolts to get out of position. STEP 1 Insert the 8 bolts (E) into the hole of the 4 legs (A) with an Allen wrench (I). Do not over-tighten the screws.
ASSEMBLY INSTRUCTIONS CAVEAT Note: Please only tighten any bolt once all bolts are placed correctly. If you tighten one bolt, it may cause other bolts to get out of position. STEP 2 Attach 2 fixed frames (B) to the legs (A), using 2 nuts (H), 2 spring washers (G), and 2 washers (F) with the socket wrench (J). Do not over-tighten the screws.
ASSEMBLY INSTRUCTIONS CAVEAT Note: Please only tighten any bolt once all bolts are placed correctly. If you tighten one bolt, it may cause other bolts to get out of position. STEP 3 Attach 2 fixed frames (B) to the legs (A), using 2 nuts (H), 2 spring washers (G), and 2 washers (F) with the socket wrench (J). Do not over-tighten the screws.
ASSEMBLY INSTRUCTIONS CAVEAT Note: Please only tighten any bolt once all bolts are placed correctly. If you tighten one bolt, it may cause other bolts to get out of position. STEP 4 Fasten all the fixed frames (B) to the legs (A), using 4 nuts (H), 4 spring washers (G), and 4 washers (F) with the socket wrench (J). Do not over-tighten the screws.
ASSEMBLY INSTRUCTIONS CAVEAT Note: Please only tighten any bolt once all bolts are placed correctly. If you tighten one bolt, it may cause other bolts to get out of position. STEP 5 Insert the 4 bolts (E) into the hole of the tabletop (C) with Allen wrench (I). Do not over-tighten the screws.
ASSEMBLY INSTRUCTIONS CAVEAT Note: Please only tighten any bolt once all bolts are placed correctly. If you tighten one bolt, it may cause other bolts to get out of position. STEP 6 Attach the 4 legs (A) to the tabletop (C), using 4 nuts (H), 4 spring washers (G), and 4 washers (F) with the wrench (D). Do not over-tighten the screws. The legs with regulator make it in good balance. Upon completing the entire assembly and bolting up, you can tighten down all screws.
CARE AND MAINTENANCE Follow the instructions for the product's material to ensure it stays in the best shape as long as possible. The information below is a general guideline. Don't hesitate to get in touch with us to learn more. • Only rinse it thoroughly with clean water to wash away dirt and grime. Never use abrasive cleansers on the furniture since they can attack the surface and leave behind scratch marks. • For stubborn grime and stains, use a soft sponge and mild soapy water.
CUSTOMER SERVICE Thanks for purchasing NUUGARDEN furniture. We are here to help you maximize your enjoyment and appreciation of it. Please do not hesitate to contact our customer service if you have any questions regarding assembly or accessories. Add: 6366 Corley Road, Norcross, GA 30071. Tel: (800) 257-7108 Web: https://nuumart.com E-mail: service@nuugarden.
NUUGARDEN USA Nuu Garden Corp. Add: 6366 Corley Road, Norcross GA 30071. Tel: (800) 257-7108 Web: https://nuumart.com E-mail: service@nuugarden.
