Use and Care Manual

7 8
ASSEMBLY INSTRUCTIONS
Step1: Attach the table top(A) to the 3 legs(B) using 1 bolt(G),1 washer
（D), 1 spring washer (E) , and 1nut (F) respectively.Do not over tighten
the screws.
Step2: Attach the under bracing(C) to the 3 legs(B) using 2 bolts(H),
2washers(I), 2spring washers(J) and 2nuts(K）respectively. Do not over
tighten the screws.
Step3:Upon completion of full assembly，all screws can be tightened
down.
2
H
↓
C
↓
B
↓
I
↓
J
↓
K