Use and Care Manual

PROBLEM POSSIBLE CAUSES
The wine cooler will not
operate
• The unit may be plugged in using a different
voltage. Also, the circuit breaker may be
tripped or there is a blown fuse.
The wine cooler is not cold
enough.
• Check the temperature control settings, as
the external environment may be too hot.
• The door may be opened too frequently.
• The door is not closed completely.
• The door seal does not seal properly.
• The wine cooler does not have sufficient
clearance.
The wine cooler vibrates while
operating.
• Make sure the unit is leveled.
The wine cooler produces a
lot of noise.
• The unit may not be leveled.
• Check the fan.
The wine cooler will not close
properly.
• The unit may not be leveled.
• The doors are reversed and not properly
installed.
• The seal is weak.
The LED display does not work.
• There may be a problem with the main
control board.
• There is a problem with the plug.
There is an LED display error. • There is a PCB problem.
The buttons do not function.
• The temperature control panel may be
damaged.
Frost or ice developed inside
the wine cooler.
• Ambient temperature too low.
• The wine cooler needed to be restarted
9
IX. TROUBLE SHOOTING
www.PyleUSA.com