PKTEWC Electric Wine Cooler Wine Chilling Refrigerator
CLASSIC GLASS DOOR SERIES STAINLESS STEEL DOOR SERIES PKDSWC18 CONTENTS I. IMPORTANT SAFETY INSTRUCTIONS ..................................................................................................................................... 2 II. PARTS DIAGRAM .......................................................................................................................................................................... 3 INSTALLING THE STAINLESS STEEL HANDLE .......................................
II. PARTS DIAGRAM • Model No: PKTEWC08 • Model No: PKTEWC12 • Model No: PKTEWC125 • Model No: PKTEWC16 10 • Model No: PKTEWC18 1. Cabinet 2. Shelf 3. Fan 4. Fan Cover 5. Ventilation Grill 10 • Model No: PKDSWC18 6. Foot 7. Upper Door Hinge with Cover 8. Glass Door 9. Door Gasket 10. Stainless Steel Handle 11. Bottom Hinge 12. Zone Separator (Door) 13. Zone Separator Unit 3 www.NutrichefKitchen.
II. PARTS DIAGRAM • Model No: PKTEWC80 • Model No: PKTEWC806 • Model No: PKTEWC120 • Model No: PKTEWC122 10 • Model No: PKTEWC160 • Model No: PKTEWC180 10 1. Cabinet 2. Shelf 3. Fan 4. Fan Cover 5. Ventilation Grill 6. Foot 7. Upper Door Hinge with Cover 8. Glass Door 9. Door Gasket 10. Bottom Hinge 4 www.NutrichefKitchen.
II. PARTS DIAGRAM • Model No: PKTEWC40 1. Cabinet 2. Shelf 3. Fan 4. Fan Cover 5. Ventilation Grill 6. Upper Door Hinge with Cover 7. Stainless Steel Glass Door 8. Stainless Steel Handle 9. Door Gasket 10. Hygrometer 11. Removable Sliding Trays 12. Bottom Hinge 13. Foot • Model No: PKTEWC1802 • Model No: PKTEWC24 11 • Model No: PKTEWC240 11 12 1. Cabinet 2. Shelf 3. Fan 4. Fan Cover 5. Ventilation Grill 6. Foot 7. Upper Door Hinge with Cover 8. Glass Door 9. Door Gasket 10. Zone Separator (Door) 11.
INSTALLING THE STAINLESS STEEL HANDLE For PKTWEC08, PKTWEC12, PKTWEC18, PKTEWCDS1805, and PKTECC40 Models only This wine cellar includes a stainless steel handle. To install the handle please follow the below instructions: 1. Pull away the door gasket in the area where the handle is to be installed on the left side as shown below in illustration #1. The gasket can easily displaced by hand, no tools are necessary. 2. Align the handle with the screws installed.
III. TEMPERATURE CONTROL ● It is recommended that the wine cooler should be installed in an area where the ambient temperature is between 16-26ºC (60-80ºF). ● If the ambient temperature is above or below the recommended ranges, the unit’s performance may be affected, and extreme cold or hot conditions may cause the interior temperature to fluctuate. This will prevent the optimal range from being reached.
● CONTROL PANEL (For PKTEWCDS1802/PKDSWC18/PKTEWC24/PKTEWC240 models only) ● You can select temperature display between Fahrenheit and Celsius setting by press and holding this button. ● You can turn the interior light ON or OFF by short pressing this button. SETTING THE TEMPERATURE CONTROL ● Your cooler is equipped with a control panel lock feature which will lock itself automatically 20 seconds after the last time a button is pressed. ● Press the button to unlock the control panel.
V. INSTRUCTION Note: ● Position your wine cooler so that the plug is accessible ● Keep your wine cooler out of direct sunlight. ● Do not place next to heat generating appliance. ● Place the wine cooler on a leveled surface that is strong enough to support the unit when it is fully loaded. To level your wine cooler, adjust the front feet located at the bottom of the unit. Important: ● Position the cooler in a dry and airy place with ambient temperature between16-26ºC (60-80ºF).
IX. TROUBLE SHOOTING 10 www.NutrichefKitchen.
