Use and Care Manual

ManualsBrandsNutriChef ManualsAppliances12.25 in. 12-Bottle Electric Wine Chilling Refrigerator Cellar Beverage Cooler

INSTALLING THE STAINLESS STEEL HANDLE

For PKTWEC08, PKTWEC12, PKTWEC18, PKTEWCDS1805, and PKTECC40 Models only

This wine cellar includes a stainless steel handle. To install the handle please follow the below instructions:

1. Pull away the door gasket in the area where the handle is to be installed on the left side as shown below in

illustration #1. The gasket can easily displaced by hand, no tools are necessary.

2. Align the handle with the screws installed.Tighten the screws using a Phillips head screwdriver until the

handle sets both ush and secured tightly against the door frame.

(DO NOT over tighten as this will cause damage to the handle assembly).

3. Replace the door gasket to its original position.

III. TEMPERATURE CONTROL

● It is recommended that the wine cooler should be installed in an area where the ambient temperature is

between 10-26ºC (50-80ºF).

● If the ambient temperature is above or below the recommended ranges, the unit’s performance may be

aﬀected, and extreme cold or hot conditions may cause the interior temperature to uctuate. This will

prevent the optimal range from being reached. In addition, keep in mind that the temperature may

uctuate depending on whether the interior light is on or oﬀ, and whether the bottles are located on

the upper, middle, or lower racks.

1. Gasket

3. Phillips Head Screw

2. Phillips Head Screw Driver

4. Handle

RECOMMENDED TEMPERATURES FOR CHILLING WINE

TEMPERATURE RANGES FOR YOUR WINE COOLER

RED WINES

DRY/WHITE WINES

ROSE WINES

14 - 18ºC

9 - 14ºC

10 - 11ºC

57- 65ºF

49- 58ºF

51- 53ºF

PKTEWC12 10-18ºC

PKTEWC08

PKTEWC18

8-18ºC

12-18ºC

46-64ºF

50-64ºF

54-64ºF

PKTEWC80

PKTEWC120

PKTEWC180

8-18ºC

10-18ºC

12-18ºC

46-64ºF

50-64ºF

54-64ºF

PKTEWCDS1802

PKTEWCDS1805

PKTECC40

8-18ºC (Uper Zone)

10-18ºC (Lower Zone)

8-23ºC

46-64ºF (Uper Zone)

54-64ºF (Lower Zone)

47-73ºF