How to Guide
www.NutrichefKitchen.com
9
Press any button to start pump, once water is detected entering the internal
circuit, the red indicators becomes blue. The machine starts to heat up
automatically when detected water in circuit with 3 buttons blinking.
The lights on the control buttons are blinking, blue lights in
used-capsule container is lighted in blue which goes o after
1 minute
Tips: You can check easier if the used container is full
or not when the blue light is ON. The indicator will
blink in red for first use, meaning the internal circuit is
empty. Please fill up water tank and open the handle.
The lights on buttons become steady when the
machine is heated up, heating up time is 40 seconds
approximately
Press the lungo coee button, before pressing the
button, make sure that:
• The handle is closed without capsule inside.
• The water tank is full.
• The water tank is firmly in place, otherwise water may
leak.
• The drip tray with the used capsule container is
completely inserted (never operate the machine
without drip tray set (part D shown in “Overview of
machine parts and controls”), or hot water will run
out when opening handle.).
• A large bowl ( 250ml size or above) is placed under
the dispenser.
• Press the middle button to start flush out.
• Open the handle when the flush out process stopped
automatically.
• Empty the cup.
• Flush out cycle is finished