PKCWC
CLASSIC GLASS DOOR SERIES PKCWC120 PKCWC150 PKCWC180 PKCWCDS188 PKCWC240 STAINLESS STEEL DOOR SERIES PKCWC12 PKCWC15 12 bottles 15 bottles 18 bottles 18 bottles (Dual-Zone) 24 bottles (Dual-Zone) PKCWC18 PKCWCDS185 PKCWC24 12 bottles 15 bottles 18 bottles 18 bottles (Dual-Zone) 24 bottles (Dual-Zone) CONTENTS I. IMPORTANT SAFETY INSTRUCTIONS ..................................................................................................................................... 2 II. PARTS DIAGRAM .........
II. PARTS DIAGRAM • Model No: PKCWC120 • Model No: PKCWC12 • Model No: PKCWC150 • Model No: PKCWC15 1 6 7 2 3 8 9 4 5 10 • Model No: PKCWC180 1 2 3 6 7 1 2 3 8 9 4 5 10 • Model No: PKCWC18 6 7 1 2 3 6 7 8 8 4 9 4 9 5 5 10 10 www.NutrichefKitchen.
II. PARTS DIAGRAM • Model No: PKCWCDS188 • Model No: PKCWCDS185 1 6 1 6 2 3 7 2 3 7 8 8 4 9 5 10 9 4 5 • Model No: PKCWC150 • Model No: PKCWC15 1 6 2 3 7 8 4 1 2 3 10 5 1. Cabinet 6. Upper Hinge 2. Fan 7. Door Gasket 3. Fan Cover 8. Glass Door 4. Shelves 9. Stainless Steel Handle 5. Foot 10. Bottom Hinge www.NutrichefKitchen.
INSTALLING INSTALLING THE THE STAINLESS STAINLESS STEEL STEEL HANDLE HANDLE For For PKCWC12, PKCWC12, PKCWC15 PKCWC15 Models Models only only This This wine wine cellar cellar includes includes a stainless a stainless steel steel handle. handle. ToTo install install the the handle handle please please follow follow the the below below instructions: instructions: 1. 1.
III. TEMPERATURE CONTROL ● It is recommended that the wine cooler should be installed in an area where the ambient temperature is between 16-26ºC (60-80ºF). ● If the ambient temperature is above or below the recommended ranges, the unit’s performance may be prevent the optimal range from being reached. In addition, keep in mind that the temperature may the upper, middle, or lower racks.
● Press the button to unlock the control panel. You will hear a “BEEP” sound to alert you that the control is now active. ● You can manually adjust the temperature inside Cooler by pressing the buttons and on the display panel. The two buttons on the panel and adjust the temperature in increments of 1ºC or 1ºF ● ● The light will be turned OFF automatically if it remains ON for 10 minutes. You have to push the “ ” ● CONTROL PANEL For PKCWCDS188 / PKCWCDS185 Models only.
IV. ELECTRIC DIAGRAM (For PKCWC120, PKCWC150, PKCWC180, PKCWC12, PKCWC15, PKCWC18 only) (For PKCWCDS188, PKCWCDS185 only) LED1 LED2 DISPLAY FAN1 FAN2 PLUG Control board YE/GN OVERLOAD PROTECTOR PTC STARTER NTC1 NTC2 θ electromagnetic Valve COMPRESSOR (For PKCWC240, PKCWC24 only) DISPLAY 1 DISPLAY 2 PLUG Control board YE/GN PTC FAN1 FAN2 θ θ LED1 LED2 NTC1 NTC1 STARTER θ OVERLOAD PROTECTOR electromagnetic Valve COMPRESSOR 8 www.NutrichefKitchen.
V. INSTRUCTION Note: ● ● ● ● Position your wine cooler so that the plug is accessible Keep your wine cooler out of direct sunlight. Do not place next to heat generating appliance. Place the wine cooler on a leveled surface that is strong enough to support the unit when it is fully loaded. To level your wine cooler, adjust the front feet located at the bottom of the unit. Important: ● Position the cooler in a dry and airy place with ambient temperature between 5-32°C (41-90°F).
VIII. TROUBLE SHOOTING PROBLEM The wine cooler will not operate POSSIBLE CAUSES AND MAINTENANCE MEASURES ● the circuit breaker may be tripped or there is a blown fuse. ● Check the temperature control settings, as the external The wine cooler is not cold enough The most ideal ambient temperature for compressor cooling wine cooler is 5C-32C (41F-90F). ● The door may be opened too frequently. ● The door is not closed completely. ● The door seal does not seal properly.
