Sous Vide Cooker PKPC235BK - PKPC235GR User Manual
IMPORTANT SAFEGUARDS 1. Before using the appliance, read these instructions and illustrations carefully. 2. Keep these instructions for future reference. 3. Check if the voltage indicated on the appliance corresponds to the local main power plug before you connect the appliance. 4. Never use any accessories or parts from other manufactures. The warranty will become invalid if such accessories or parts have been used. 5.
OPERATION 1. Clip the PKPC235 securely inside any deep heat-proof container without touching the very bottom. 2. Fill the container with water, check the water level indicator on the PKPC235, the water level should be between the min and max (the suitable water level to work)indicator on the front of the circulator. As the water level will rise when you add food to the container, so don’t fill it up too high. NOTE: As the water temperature increase, the water will begin to evaporate.
Press the set button again, All timers and work time will stop flashing. Do not operate for ten seconds. When setting is finished, press the power button. The timer will start after the beep. The appliance will start to heat after the beep when 00:00 is reached. Follow the work time set to counter clockwise, the appliance will beep and stop heating when the final worktime is reached. Press the power button and set button at the same time to change the temperature degree by Celsius or Fahrenneit.
Troubleshooting Cleaning 1. The PKPC235 will not turn on: • Make sure that the appliance is properly plugged into a power outlet • Check the power cord for tears and frays. Do not use the appliance if the power cord is damaged. • Make sure the power button is on. The LCD display screen is showing the information. With frequent use, descaling should be done every month or as needed. . The LCD display screen reads error code: • E01: NTC Open Circuit. Temperature below 0 degree.
