User Manual

www.NutrichefKitchen.com 7
3. Connecting gas hose to Pizza Oven
Please note the factory setting that the hose has
been assembled to the Pizza Oven.
4. Connecting to gas tank
WARNING
• Please always keep the gas bottle in upright position.
• The size for 20 lbs LP gas cylinder is 12.2 inches in
diameter and 17.9 inches tall
• If the appliance is not in use, the gas must be turned
o at the supply cylinder.
• The cylinder used must include a collar to protect
the cylinder valve.
• The minimum distance for the appliance and the
20lb gas tank is 1m apart.
This gas tting is clockwise. Make sure that the tank is completely switched o
and screw the regulator as far as possible into the gas tank valve.
CONNECTING THE LIQUID PROPANE GAS CYLINDER
1. To connect the liquid propane gas cylinder:
2. The cylinder valve should be in OFF position.
3. Make sure the burner valve is in OFF position.
4. Inspect the valve connections, port and regulator assembly.
Remove debris and inspect the hose for damage.
5. When connecting the regulator assembly to the valve, use your hand to tighten
the nut clockwise until it stops. Use of a wrench could damage the quick
coupling nut and result in a hazardous situation.
6. Open the cylinder valve fully by turning the valve counterclockwise.
7. Before lighting the oven, use a soap and water solution to check all connections
for leaks.
8. If a leak is found, turn the cylinder valve OFF, and do not use the oven until
local liquid propane dealer can make repairs.