Instructions / Assembly
www.NutrichefKitchen.com6
8. The ice-making assembly is equipped inside of appliance, and the ice-making
assembly will keep producing ice when the water is pumped into it. When the
ice forms in the ice-making assembly, the ice cubes will be transferred into the
ice tray and then the ice cubes will drop into the ice basket. And the above
action will be repeated until the ice basket is full.
9. The “ ” indicator will light up when the ice basket is full and then the ice
maker will stop the ice-making cycle automatically. Open the front lid and
gently remove the ice from the ice basket with the ice scoop. And then replace
the ice basket and close the front lid, then the ice maker will restart its ice-
making function automatically. If the ice is not removed, after about 8 hours,
the appliance will automatically work again, alternatively, you can press
“ON/OFF” key to restart the appliance.
10. The “ ” indicator will ash when the water reservoir is lack of water.
(1) If the appliance is connected with external water source by the 1/4PE tube
shown in the section of “CLEANING AND MAINTENANCE” (see Fig.1), the
water reservoir will be relled with water automatically and the appliance will
restart the ice-making cycle; alternatively, the user can remove the ice basket
and rell the water reservoir with water to “MAX” mark manually, and then the
appliance will restart the ice-making cycle automatically. Please remember to
close the front lid after relling water manually avoid overow.
(2) If the appliance is not connected with external water source, rstly remove
the ice basket and then ll the water reservoir with water manually. After the
water reservoir is relled with water, please close the front lid, then the appliance
will restart the ice-making cycle automatically.
11. When you have got your desired amount of ice, stop the ice-making cycle by
pressing the “ON/OFF” key and unplug the unit from the wall outlet.
12. Open the front lid and transfer the ice to a freezer.
13. Allow the ice maker to reach room temperature.
14. Suggest replacing the water every a week. Please empty the water reservoir
if the ice maker is not used for a long time.
15. The ice maker can be connected with external water source by the 1/4PE
tube shown in the section of “CLEANING AND MAINTENANCE” (see Fig.1) if
you want to add the function of relling water automatically.