NCICNUG Countertop Ice Maker Machine Electric Ice Maker Countertop with Ice Scoop & Basket, Includes Rear-mounted Hose Drainage
To ensure proper use of this appliance and your safety, please read the following instructions carefully before operating this appliance. IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fire, explosion, electric shock, or injury when using your ice maker, follow these important safety instructions: 1. Before using, check that the voltage power corresponds to the one shown on the appliance nameplate. 2. Do not remove any safety, warning, or product information labels from your ice maker. 3.
13. DO NOT immerse any part of the product in water. 14. To disconnect, turn any control to “OFF”, then remove plug from wall outlet. 15. DO NOT plug or unplug product with wet hands. 16. Unplug the product before cleaning, maintaining and when not in use. 17. DO NOT use with water that is microbiologically unsafe or of unknown quality. 18. DO NOT clean your ice maker with any flammable fluids. The fumes may create a fire hazard or explosion. 19. DO NOT overturn the ice maker.
KNOW YOUR ICE MAKER Top cover Viewing window Front lid Top cover Ice tray Ice basket Power cord Power cord Front housing Front housing Ice basket Drain tube Ice spoon CONTROL PANEL Key/Indicator Function Start or stop the appliance. “Clean” key. Solid light The “Ice-making” indicator will light solidly when the appliance is making ice. Solid light The “Clean” indicator will light solidly when the appliance is performing cleaning.
BEFORE FIRST USE 1. Unpack the appliance, then check and make sure that all the accessories including ice basket and ice scoop etc. are complete. Please contact with the client service department if some accessories are missed. 2. Please ensure the ice maker is level and on a stable table or platform to avoid malfunction. 3. The incline angle of the ice maker cabinet should not exceed 45° during transportation or use. Do not turn the ice maker upside down.
8. The ice-making assembly is equipped inside of appliance, and the ice-making assembly will keep producing ice when the water is pumped into it. When the ice forms in the ice-making assembly, the ice cubes will be transferred into the ice tray and then the ice cubes will drop into the ice basket. And the above action will be repeated until the ice basket is full. 9. The “ ” indicator will light up when the ice basket is full and then the ice maker will stop the ice-making cycle automatically.
CLEANING AND MAINTENANCE To keep your ice tasting fresh and your ice maker looking great, we recommend cleaning your ice maker at least once per week. 1. Remove the ice basket, add water and detergent into the water reservoir, then press and hold “Clean” key for about 3 seconds, the “ ” indicator lights up and the appliance enters into the cleaning mode. 2. After cleaning for 8 minutes, the appliance stops working and the “ ” indicator flashes. 3.
TROUBLESHOOTING Problem Possible Causes Solution 1. Stop making ice, refill water and then press “ON/OFF” key 2. The water screen at the bottom to restart ice-making cycle. 2. Remove the water screen at of water reservoir is blocked. the bottom for cleaning. 3. Pump malfunction. 3. Send it to the authorized 4. There is foreign objects blocked department for repair. 4. Check the foreign objects and the float of water reservoir. restart the appliance. 1. Be lack of water. flashes lights up 1.
Problem Possible Causes Solution Poor ice-making result. The ice-making process is normal but the ice produced is broken, which lasts for more than 2 hours. 1. Poor heat dissipation. 2. The water temperature is too high. 3. The ambient temperature is too high. 4. The ice-making system is abnormal. 1. Leave a 15cm clearance on all sides of the ice maker for proper ventilation. 2. Fill the water reservoir with water ranges between 8°C or 46.4°F and 28°C or 82.4°F 3.
Questions? Issues? We are here to help! Phone: (1) 718-535-1800 Email: support@pyleusa.
