Instructions / Assembly

www.NutrichefKitchen.com

Swivel Caster (Part No. 40900213)

Standard Caster

(Part No. 40900214)

Swivel Caster with Brake (Part No. 40900212)

2. Cart

• To attach side panels, align side panel leg holes

with leg holes on each side of bottom shelf.

Left side panel has match holder attachment.

• Attach left and right side panels to sides of

bottom shelf with (4) M6x13 screws. (A)

• Attach back panel to bottom shelf and two

side panels with (6) M4x10 screws. (B)

• Attach tank baﬄe bar to back panel and

bottom shelf with (2) M4x10 screws. (C)

• Align door bracket holes with holes on side

panels. Attach bracket to side panels with (4)

M4x10 screws. (D)

Note:

Attach bracket so that magnets are at top.

• Align the holes in the cart support angle bars

with holes on bottom shelf and side panels.

Attach angle bars with (8) M4x10 screws. (E)

M4X10 screw Qty: 20 pcs

M6X13 screw Qty: 4 pcs

A B C

D E

3. Front Doors

• Remove the (4) M5x15 screws pre-assembled to

the door handle ends, and use them to attach

handles to doors. See g. A.

• Insert the pin at the top of each door through the

hole in the door bracket hinge. Insert the pin at the

bottom of each door into the hole on the bottom

panel. See g. B.

IMPORTANT: If the doors do not line up when

closed or do not close freely, the hinges may need

to be adjusted. Loosen the hinge screws, adjust the

hinge position as necessary, and retighten screws.

See g. B.