Use and Care Manual

Remark:

a. In case of any modication after setting, button again to reset.

b. To stop working, simply press button to pause

c. To cancel program during working, long press button for 3 seconds to restore

initial state.

5. Pulse/Clean button: (touch button)

1. Press Pulse/Clean button to start cleaning program;

(setting program/working for 1minute)

2. Press Pulse/Clean button again to start pulse function

3. Under the cleaning program，simply press button to run the 1 minute

cleaning program

Chapter 3 Cleaning and Maintenance

1. Make sure plug is OFF before cleaning.

2. Letting the pitcher cool down before cleaning to prevent burn by after heat.

3. Caution the sharp blade to avoid injury while cleaning.

4. Do not use chemicals such as alcohol to do the wiping.

5. If the residue at the bottom of the cup is dicult to clean, rst soak it in warm

water, then brush it with the sponge or cloth in the same direction, nally rinse it

o with water.

6. Do not rinse pitcher and motor base directly to avoid water leakage into the

interior.

7. Keep dry of the cover and motor base after cleaning.

8. Keep any appliance away from heat and re.