User Manual

www.NutrichefKitchen.com
5
III. TEMPERATURE CONTROL
• CONTROL PANEL
You can select temperature display between Fahrenheit and Celsius setting by pushing this button.
• SETTING THE TEMPERATURE CONTROL
• Your cooler is equipped with a control panel lock feature which will lock itself automatically 20
seconds after the last time a button is pressed.
• Press the button to unlock the control panel. You will hear a “BEEP” sound to alert you that the
control is now active.
• You can manually adjust the temperature inside Cooler by pressing the buttons on the display panel.
The two buttons on the panel and adjust the temperature in increments of 33.8°F.
• You can also turn the interior light on or o by pressing the “Light” button.
• Note:
• If the unit is unplugged, the power is lost or turned o, you must wait 3 to 5 minutes before restarting
the unit if you attempt to restart before this time delay, the cooler will not start.
• When you use the cooler for the rst time or restart the cooler after having been shut off for a long
time, there could be a few degrees variance between the temperature you select and the one
indicated on the LED read out. This is normal and it is due to the length of the activation time.
Once the cooler is running for a few hours everything will be back to normal.
• INTERIOR LIGHT:
• You can turn the interior light ON or OFF by pushing the button marked with the “Light” symbol.
• The light will be turned o automatically if it remains ON for 10 minutes.
You have to push the “Light” button again to turn it back on.