User Manual

1
Description
1. Inner Liner 9. Water Drain Plug
2. Water Reservoir 10. Compressor
3. Ice collecting Tray 11. Water Pump
4. Ice Bin Full Sensor 12. Power Cord
5. Ice Shovel 13. Lid
6. Water Tray 14. Control Board
7. Evaporator 15. Window
8. Water Inlet Tube
Function
Instant making ice
3 different ice sizes
Ice full alarming, deficient water alarming
Crystalline ice bullet warhead
12pcs of ice cube per cycle
Before/First Use of Your Ice Maker
1.During transportation, the incline angle of the cabinet should not be over 45° .Do not turn the Ice maker
upside down. As this may damage the compressor and sealed system.
2.Remove all packing material and carefully check your ice maker to ensure it is in good condition and that
there is no damage to the ice maker or power cord and plug.
3.The Ice maker should be placed horizontally on a level surface. To ensure proper ventilation for your Ice
maker allow 150mm of space at the top, the back and on each side. Do not install the Ice maker near an
oven, radiator, or any other heat source.
4.Before using the Ice maker for the first time, please wait 2 hours after positioning it, and keep the front lid
open for at least 2hours .
5.Ensure that the voltage indicated on the ice maker corresponds with the voltage in your home.
6.Pure water is not allowed to be used on this unit, spring water is recommended.