User Manual

ManualsBrandsNutriBullet ManualsBlenders12-Piece High-Speed Blender/Mixer System, Gray (600 Watts)

SAFETY WARNINGS: EXTRACTING FOR NUTRIBLASTS

• TO TURN OFF THE NUTRIBULLET AT ANY TIME DURING BLENDING, LIFT

THE CUP OFF THE POWER BASE. ALWAYS ALLOW THE MOTOR TO STOP

COMPLETELY BEFORE REMOVING THE CUP/ PRECISION EXTRACTOR

BLADE. ALWAYS UNPLUG THE POWER BASE UPON COMPLETION OF USE.

• DO NOT TOUCH COUPLING GEAR DIRECTLY WITH HANDS AFTER USE! THE

COUPLING GEAR IN PRECISION EXTRACTOR BLADE BASE AND POWER

BASE WILL BE HOT!

• DO NOT RUN FOR MORE THAN 1 MINUTE INTERVALS.

• DO NOT RUN FOR MORE THAN 3 CONSECUTIVE 1 MINUTE INTERVALS

WITHOUT ALLOWING THE POWER BASE TO COOL TO PREVENT

OVERHEATING AND ALLOW INGREDIENTS TO SETTLE FOR 2-3 MINUTES

AFTER THE 3RD EXTRACTION CYCLE.

• POWER BASE IS EQUIPPED WITH AN INTERNAL THERMAL BREAKER THAT

SHUTS OFF THE POWER BASE IF THE UNIT OVERHEATS.

• IF THE POWER BASE OVERHEATS AND SHUTS OFF, UNPLUG THE POWER BASE

AND LET IT COOL FOR AN HOUR OR MORE BEFORE ATTEMPTING TO USE IT

AGAIN. POWER BASE WILL RESET WHEN THE UNIT IS POWERED OFF AND THE

THERMAL BREAKER HAS COOLED DOWN SUFFICIENTLY.

• ALLOW THE NUTRIBULLET TO COOL DOWN FOR 10 MIN AFTER 4-5

CYCLES TO PREVENT OVERHEATING AND DAMAGING THE UNIT.

• To prevent leakage, always align and hand-tighten the precision extractor

blade to the vessel or cup prior to inverting it and placing the assembly on to

the motor base.

SAVE THESE INSTRUCTIONS

FOR HOUSEHOLD USE ONLY

POLARIZED PLUG INFORMATION

This appliance has a polarized plug (one prong is wider than the other) to

reduce the risk of electric shock. This plug will correctly fit in a polarized

outlet only one way. If the plug does not fit fully in the outlet, reverse the

plug. If it still does not fit, contact a qualified electrician. Do not modify the

plug in any way, as doing so will void the warranty.

CLEANING SAFEGUARDS

• THE PRECISION EXTRACTOR BLADE MUST BE CLEANED IMMEDIATELY

AFTER EACH USE.

• ALWAYS UNPLUG THE POWER BASE PRIOR TO CLEANING,

ASSEMBLING OR DISASSEMBLING.

• NEVER SUBMERGE THE POWER BASE IN WATER OR PLACE IT IN THE

DISHWASHER. WIPE OFF ANY DEBRIS INSIDE THE POWER BASE

IMMEDIATELY WITH WARM WATER TO KEEP IT IN GOOD WORKING ORDER.

• DO NOT WASH THE PRECISION EXTRACTOR BLADE IN THE DISHWASHER AS

ELEVATED TEMPERATURES CAN DAMAGE GASKET SEALS.

• THE NUTRIBULLET CUPS AND PRECISION EXTRACTOR BLADES SHOULD

NOT BE IMMERSED IN BOILING WATER FOR ANY REASON AS THIS WILL

WARP THE PLASTIC AND DAMAGE THE GASKETS.

• THE PRECISION EXTRACTOR BLADE IS SHARP! USE CARE WHEN CLEANING

THE PRECISION EXTRACTOR BLADES TO AVOID INJURY! RINSE PRECISION

EXTRACTOR BLADES IMMEDIATELY AFTER EACH USE TO PREVENT DEBRIS

FROM DRYING AND STICKING TO IT. IF NECESSARY, USE A DISH BRUSH TO

LOOSEN ANY DEBRIS AROUND BLADE, GASKETS AND BLADE HOUSING

THREADS WITH CARE. DO NOT USE YOUR FINGERS.

• HAND WASH ONLY WITH MILD DISH SOAP AND WARM WATER (NOT HOT).

• ALLOW TO AIR DRY PRIOR TO PROPER STORAGE.

• FOR TOUGH DEBRIS, FILL THE CUP ½ FULL WITH WARM (NOT HOT), MILD

SOAPY WATER. THEN, SIMPLY TWIST ON THE PRECISION EXTRACTOR

BLADE, POP IT ON THE BASE AND GIVE IT A RUN FOR 30-45 SECONDS.

FOLLOW UP WITH A QUICK BRUSH.

• WHEN WASHING PRECISION EXTRACTOR BLADE, DO NOT ATTEMPT

TO REMOVE THE GASKET RING. SIMPLY HAND WASH THE PRECISION

EXTRACTOR BLADE IN WARM, MILD SOAPY WATER. ATTEMPTED REMOVAL

OF THE GASKET MAY PERMANENTLY DAMAGE THE PRECISION EXTRACTOR

BLADE CONFIGURATION AND CAUSE LEAKAGE. IF IN TIME A GASKET

BECOMES LOOSE OR DAMAGED, PLEASE CONTACT CUSTOMER SERVICE FOR

A REPLACEMENT NUTRIBULLET PRECISION EXTRACTOR BLADE HOLDER AT:

1-855-346-8874.

• WE RECOMMEND REPLACING YOUR EXTRACTOR BLADE EVERY 6 MONTHS

OR AS NEEDED FOR OPTIMAL PERFORMANCE. TO ORDER A REPLACEMENT

BLADE, SIMPLY VISIT: WWW.NUTRILIVING.COM

CAPACITIES:

TASK

Ice Crushing

Grinding

Chopping

WEIGHT

100g

180g

340g

100g

TIME

10 seconds

30 seconds

5-10 seconds

ITEM

Ice

Coee Beans

Grain

Tomatoes, onions, garlic

NUTRIBULLET,

o prevent leakage, always align and hand-tighten the precision extractor

NUTRIBULLET,

o prevent leakage, always align and hand-tighten the precision extractor

blade to the vessel or cup prior to inverting it and placing the assembly on to

NUTRIBULLET,

blade to the vessel or cup prior to inverting it and placing the assembly on to

LWAYS UNPLUG THE POWER BASE PRIOR TO CLEANING,

NUTRIBULLET,

LWAYS UNPLUG THE POWER BASE PRIOR TO CLEANING,

ASSEMBLING OR DISASSEMBLING.

NUTRIBULLET,

ASSEMBLING OR DISASSEMBLING.

EVER SUBMERGE THE POWER BASE IN WATER OR PLACE IT IN THE

NUTRIBULLET,

EVER SUBMERGE THE POWER BASE IN WATER OR PLACE IT IN THE

DISHWASHER. WIPE OFF ANY DEBRIS INSIDE THE POWER BASE

NUTRIBULLET,

DISHWASHER. WIPE OFF ANY DEBRIS INSIDE THE POWER BASE

IMMEDIATELY WITH WARM WATER TO KEEP IT IN GOOD WORKING ORDER.

NUTRIBULLET,

IMMEDIATELY WITH WARM WATER TO KEEP IT IN GOOD WORKING ORDER.

• DO NOT WASH THE

NUTRIBULLET,

• DO NOT WASH THE

ELEVATED TEMPERATURES CAN DAMAGE GASKET SEALS.

NUTRIBULLET,

ELEVATED TEMPERATURES CAN DAMAGE GASKET SEALS.

•

NUTRIBULLET,

•

NUTRIBULLET,

HE NUTRIBULLET CUPS AND

NUTRIBULLET,

HE NUTRIBULLET CUPS AND

NOT BE IMMERSED IN BOILING WATER FOR ANY REASON AS THIS WILL

NUTRIBULLET,

NOT BE IMMERSED IN BOILING WATER FOR ANY REASON AS THIS WILL

NUTRIBULLET,

WEIGHT

NUTRIBULLET,

WEIGHT

180g

NUTRIBULLET,

180g

340g

NUTRIBULLET,

340g

100g

NUTRIBULLET,

100g

TIME

NUTRIBULLET,

TIME

10 seconds

NUTRIBULLET,

10 seconds

LLC

plug in any way, as doing so will void the warranty.

LLC

plug in any way, as doing so will void the warranty.

CLEANING SAFEGUARDS

LLC

CLEANING SAFEGUARDS

PRECISION EXTRACTOR

LLC

PRECISION EXTRACTOR

BLADE MUST BE CLEANED IMMEDIATELY

LLC

BLADE MUST BE CLEANED IMMEDIATELY

AFTER EACH USE.

LLC

AFTER EACH USE.

LWAYS UNPLUG THE POWER BASE PRIOR TO CLEANING,

LLC

LWAYS UNPLUG THE POWER BASE PRIOR TO CLEANING,

ASSEMBLING OR DISASSEMBLING.

LLC

ASSEMBLING OR DISASSEMBLING.