User Manual

2322
EXTRACTING
1
Fill ingredients into the Tall or Short Cup.
2
Add the liquid of your choice up to the MAX line.
(Liquid is required!).
3
Twist the Extractor Blade onto the Tall Cup
and hand tighten to make sure the vessel has
been sealed.
4
Press the vessel blade side-down onto the
Power Base. Press down and twist to extract
for no longer than 1 minute. If more extraction is
needed, wait 1 minute, then repeat the extraction
process in 1 minute intervals up to 3 times as
needed to achieve the desired consistency. If more
than three 1-minute extractions are needed, allow
the power base to cool for 2-3 minutes a er the
third extraction before beginning the next round.
You can see the extraction process happening.
Keep an eye on the consistency. Your NutriBlast is
ready when it looks smooth and creamy!
HOW IT WORKS
CAUTION:
Do not run the Power Base in excess of 1 minute per interval. Do not run the Power
Base for more than three 1-minute intervals without allowing it to cool for 2-3
minutes a er the third extraction. Running the motor for more than 1 minute
consecutively in any interval may result in permanent damage to the Power Base.
Friction from the rotating blade when extracting can cause ingredients to heat
and generate internal pressure in the sealed vessel.If the vessel is warm to touch,
allow to cool before carefully opening pointed away from your body.
5
To turn o the NutriBullet — simply twist in
the opposite direction (to the right) to release the
tabs and stop pressing down on the Cup. Once
the Power Base stops completely, remove the
Cup from the Power Base.
Check out NutriLiving.com
for recipes, advice, Q&A
from our NutriBullet
Registered Dietitians!
NUTRIBULLET,
NUTRIBULLET,
Press the vessel blade side-down onto the
NUTRIBULLET,
Press the vessel blade side-down onto the
Press down and twist to extract
NUTRIBULLET,
Press down and twist to extract
for no longer than 1 minute. If more extraction is
NUTRIBULLET,
for no longer than 1 minute. If more extraction is
needed, wait 1 minute, then repeat the extraction
NUTRIBULLET,
needed, wait 1 minute, then repeat the extraction
process in 1 minute intervals up to 3 times as
NUTRIBULLET,
process in 1 minute intervals up to 3 times as
needed to achieve the desired consistency. If more
NUTRIBULLET,
needed to achieve the desired consistency. If more
than three 1-minute extractions are needed, allow
NUTRIBULLET,
than three 1-minute extractions are needed, allow
the power base to cool for 2-3 minutes a er the
NUTRIBULLET,
the power base to cool for 2-3 minutes a er the
third extraction before beginning the next round.
NUTRIBULLET,
third extraction before beginning the next round.
You can see the extraction process happening.
NUTRIBULLET,
You can see the extraction process happening.
NUTRIBULLET,
NUTRIBULLET,
CAUTION:
NUTRIBULLET,
CAUTION:
NUTRIBULLET,
Do not run the Power Base in excess of 1 minute per interval. Do not run the Power
NUTRIBULLET,
Do not run the Power Base in excess of 1 minute per interval. Do not run the Power
Base for more than three 1-minute intervals without allowing it to cool for 2-3
NUTRIBULLET,
Base for more than three 1-minute intervals without allowing it to cool for 2-3
minutes a er the third extraction. Running the motor for more than 1 minute
NUTRIBULLET,
minutes a er the third extraction. Running the motor for more than 1 minute
consecutively in any interval may result in permanent damage to the Power Base.
NUTRIBULLET,
consecutively in any interval may result in permanent damage to the Power Base.
NUTRIBULLET,
Friction from the rotating blade when extracting can cause ingredients to heat
NUTRIBULLET,
Friction from the rotating blade when extracting can cause ingredients to heat
LLC
LLC
To turn o the NutriBullet simply twist in
LLC
To turn o the NutriBullet simply twist in
the opposite direction (to the right) to release the
LLC
the opposite direction (to the right) to release the
tabs and stop pressing down on the
LLC
tabs and stop pressing down on the
the
LLC
the
Power Base
LLC
Power Base
Cup
LLC
Cup
from the
LLC
from the