Instructions / Assembly

1514
Getting started couldn’t be easier! Get your NutriBullet unit out
and give the cups and blades a quick rinse with warm soapy water.
4 EASY STEPS
STEP 1:
ADD 50% LEAFY GREENS
& 50% FRUIT TO THE TALL CUP
Two cups makes up a full serving of leafy greens, so that’s the
amount you want to work up to in the first few weeks. That’s
about two good-sized handfuls.
A serving of fruit is generally a cup. We suggest adding a banana
or  of an avocado to every Blast for the “creamy” factor. Then
add three more fruits (or more if you can fit it!) to your Tall Cup.
STEP 2: FILL ONLY UP TO THE MAX LINE WITH
LIQUID
To make a NutriBlast, you must add liquid. We suggest you use
a liquid of your choice (such as water, coconut water or almond
milk) up to but never beyond the Max Line. For a thicker Blast,
use a little bit less liquid. Add ice if you want, but do not exceed
25% of the total volume of ingredients. For the most nutritious,
frosty blasts we recommend using frozen fruit and/or veggies.
STEP 3: ADD YOUR BOOST
(optional, add  –  nuts and/or seeds, if desired.)
Add a handful of nuts, seeds or goji berries to pack in some
essential fatty acids, fiber and nutrition to every sip. Boosts
make for a more nutritious and filling NutriBlast.
GETTING STARTED
STEP 4: TWIST ON THE NUTRIBULLET BLADE,
EXTRACT, ENJOY!
TO TURN OFF THE NUTRIBULLET, simply twist in
the opposite direction (to the right) to release the tabs and
stop pressing down on the cup. Once the power base stops
completely, remove the cup from the power base.
NOW IT’S TIME TO MAKE
YOUR FIRST NUTRIBLAST!
NUTRIBULLET,
NUTRIBULLET,
NutriBlast, you must add liquid. We suggest you use
NUTRIBULLET,
NutriBlast, you must add liquid. We suggest you use
a liquid of your choice (such as water, coconut water or almond
NUTRIBULLET,
a liquid of your choice (such as water, coconut water or almond
LLC