Use and Care Manual

Before first use.
Before using your nutribullet
®
Food Processor for the first time,
please take a moment to perform the steps below.
1. UNPACK
Open box. Remove the Motor Base and all attachments. Place all
parts on a flat, dry surface.
2. CLEAN
Rinse all detachable parts and accessories. All parts except the Motor
Base are dishwasher safe, or can be cleaned by rinsing with warm,
soapy water. Clean the Motor Base with a clean, damp cloth.
WARNING: Never submerge the Motor Base in water or any other liquid. See Care
& Maintenance instructions on page 22 for more detailed cleaning instructions.
7-cup work bowl
place the blade adaptor in the work bowl
1 Place the Work Bowl on a
clean, dry, flat surface, like
a countertop or table.
Assembly.
Review all warning and caution statements in the Important Safeguards
section (pages 2-5) and above before proceeding to Step 1.
Assembly & use.
The nutribullet
®
Food Processor features a multi-speed control panel
for all types of food prep.
Control panel.
OFF:
Stops the Food Processor when
operating on continuous LOW or
HIGH speeds.
HIGH:
Continuous HIGH-speed
chopping or mixing.
PULSE:
A burst of chopping or mixing
that runs at HIGH speed.
PULSE must be held to activate;
motion will stop when the
button is released.
LOW:
Continuous LOW-speed
chopping or mixing.
LOW
LOW
LOW
LOW
HIGH
HIGH
HIGH
HIGH
PULSE
PULSE
PULSE
PULSE
OFF
OFF
OFF
OFF
2 Place the Blade Adaptor in
the Work Bowl. Lower the
Blade Adaptor onto the top
of the shaft located in the
center of the Work Bowl.
Push down so the adaptor is
firmly and securely in place.
1110