FOOD PROCESSOR User guide.
Warning! To avoid the risk of serious injury, carefully read all instructions before operating your nutribullet® Food Processor. When using any electrical appliance, basic safety precautions should always be observed, including the following important information. ! Save these instructions! FOR HOUSEHOLD USE ONLY GENERAL SAFETY INFORMATION • Do not use this appliance if any parts appear to be damaged. If you have any questions or concerns, please contact customer service.
• Do not let the power supply cord hang over the edge of a table or countertop. • Do not let the power supply cord touch hot surfaces, including stove, or become knotted or tangled. • This unit has a polarized plug. To reduce the risk of electric shock, this plug will fit into a polarized outlet only one way. If the plug does not fit fully inside the outlet, reverse the plug. If it still |does not fit, contact a qualified electrician. • Regularly inspect the power cord, plug, and appliance for any damage.
Contents. 08 What’s included 09 Assembly guide 10 Control panel 11 Assembly & use 11 11 13 16 18 20 Before first use Assembly Using the chopping blade Using the dough blade Using a disc attachment Using the dual-size food pusher 21 Troubleshooting 22 Care & maintenance 23 23 How to store Replacement parts 24 nutribullet® Food Processor one-year limited warranty 27 Warranty registration Thank you for purchasing the nutribullet® Food Processor.
Assembly guide. What’s included.
Control panel. Assembly & use. The nutribullet® Food Processor features a multi-speed control panel for all types of food prep. Before first use. Before using your nutribullet® Food Processor for the first time, please take a moment to perform the steps below. OFF: OFF LOW HIGH PULSE Stops the Food Processor when operating on continuous LOW or HIGH speeds. LOW: OFF LOW HIGH PULSE Continuous LOW-speed chopping or mixing. 1. UNPACK Open box. Remove the Motor Base and all attachments.
hick thin/t 3a If using the Chopping Blade or Dough Blade: Hold the plastic center of the blade, and carefully place it on 3a Ifof using the Chopping top the BladeBlade Adaptor. Slide the blade down until it reaches the bottom of the Work Bowl. Press it down firmly to set it in place. CAUTION: Blades are sharp! Handle carefully. Keep fingers away from the blade’s sharp edges. Always hold blades by grasping the plastic areas.
3 Place the Work Bowl Lid on top of the Work Bowl. Turn the lid clockwise, lining up the arrows on the lid and handle, to lock into place. Place the Dual-Size Food Pusher into the Feed Chute. 4 Place the Work Bowl, with lid attached, onto the Motor Base. Turn the bowl clockwise to lock into place. You should hear a click when the bowl is properly locked into place. OFF OFF LOW HIGH HIGH PULSE When you’re done, press the OFF button. Wait until the Chopping Blade has come to a complete stop.
Using the dough blade. The Dough Blade can be used for combining ingredients to make dough for pie crusts, pizza, bread, and more! OFF LOW HIGH PULSE 4b LOW: Use LOW speed for 1 Place Work Bowl, with Dough Blade attached, on a clean, dry, flat surface like a countertop. Refer to the assembly instructions on page 12 for how to properly attach the Dough Blade. 2 all dough making. Using a lower speed will help to avoid overworking the dough which can lead to a tough dough.
Using a disc attachment. The disc attachments are for slicing, shredding, or spiralizing your ingredients. The Slice/Shred Discs are reversible and labeled on either side. Place the side you want to use with its name facing up. OFF 5 1 Place the Work Bowl, with disc attached, on a clean, dry, flat surface like a countertop. Refer to the assembly instructions on page 12 for how to properly attach a disc for use. 2 LOW HIGH Plug in the unit and press the HIGH speed button.
Troubleshooting. PROBLEM Unit does not power on. OFF 9 LOW HIGH OFF PULSE Carefully remove the Disc Blade and Blade Adaptor from the bowl and set them aside. CAUTION: Blades are sharp! Handle carefully. Keep fingers away from the blades sharp edges. Always hold blades by grasping the plastic areas. 10 LOW HIGH PULSE Remove your food from the Work Bowl using a spatula or spoon. Dispose of any leftover food in the bowl, then clean the bowl, blades, and other parts to avoid food residue buildup.
Care & maintenance. How to store. Cleaning the nutribullet® Food Processor is quick and easy. All detachable parts (Blade Adaptor, Chopping Blade, Dough Blade, Slice/ Shred Discs, Spiralizer Disc, Work Bowl, Work Bowl Lid, and Dual-Size Food Pusher) are TOP RACK dishwasher-safe. The Motor Base can be quickly hand-washed with a damp cloth. Read on for best practices. The blade attachments conveniently store within the Work Bowl when not in use.
nutribullet® Food Processor one-year limited warranty. LIMITED WARRANTY FOR NUTRIBULLET ® nutribullet's limited warranty obligations are confined to the terms set forth below: nutribullet, LLC (“nutribullet”) warrants this nutribullet® against defects in materials and workmanship for a period of one year from the date of original retail purchase.
Warranty registration. THIS LIMITED WARRANTY AND THE REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS, WHETHER ORAL OR WRITTEN, EXPRESS OR IMPLIED. NUTRIBULLET SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Capital Brands Distribution, LLC | nutribullet.com | All rights reserved. nutribullet® and the nutribullet logo are trademarks of CapBran Holdings, LLC registered in the U.S.A. and worldwide. Illustrations may differ from the actual product. We are constantly striving to improve our products, therefore the specifications contained herein are subject to change without notice.
