Use and Care Manual

4
• Do not let the power cord
hang over the edge of a table
or counter top.
• Do not let the power cord
touch hot surfaces, such as a
stove or let it become tangled
or knotted.
• Always make sure the pulp
basin cover is securely in
place (with locking handle
in its upright and locked
position) before the motor is
turned on. Do not unlock the
locking handle while the juicer
is in operation.
Always ensure the
juicer is turned OFF
after each use. Before
disassembling, make sure
the sieve has stopped
rotating and the motor
has completely stopped.
• Do not push food into the feed
chute with your fingers or
utensils. Always use the food
pusher provided. Do not place
your hand or fingers into the
feed chute when it is attached
to the juicer. If food becomes
lodged in the feed chute, use
the food pusher provided
or another piece of fruit or
vegetable to push it down.
Turn the motor o and ensure
that all moving parts have
stopped before disassembling
the juicer to remove the
remaining pulp.
• Do not use the juicer if the
rotating sieve is damaged.
• Do not use the juicer
without the pulp basin and
basin cover attached to
the motor base. Please see
assembly instructions for
proper placement.
• Do not modify the plug in any
way. This juicer has a polarized
plug. To reduce the risk of
electric shock, this plug will fit
in a polarized outlet only one
way. If the plug does not fit fully
in the outlet, reverse the plug.
If it still does not fit, contact a
qualified electrician.
ADDITIONAL
SAFEGUARDS
Remove and safely
discard any packaging
material or promotional
labels before using the
juicer for the first time.
• To eliminate a choking
hazard for young children,
remove and safely discard the
protective cover fitted to the
power plug of this juicer.
• Do not touch the small
cutting blades/teeth on the
bottom/base of the sieve.
BLADES ARE SHARP! HANDLE
WITH EXTREME CARE!
• Keep fingers away from the
sharp blade in the feed chute.