Use and Care Manual

4
• Do not let the power cord
hang over the edge of a table
or counter-top.
• Do not let the power cord
touch hot surfaces, such as a
stove or let it become tangled
or knotted.
• Always make sure the pulp
basin cover is clamped
securely in place (with locking
handle) before the motor is
turned on. Do not unfasten
the clamps (locking handle)
while the juicer is in operation.
Always ensure the juicer
is turned OFF after
each use. Before
disassembling, make sure
the sieve has stopped
rotating and the motor
has completely stopped.
• Do not push food into the
feed chute with your fingers
or utensils. Always use the
food pusher provided. Do not
place your hand or fingers
into the feed chute when it is
attached to the juicer. If food
becomes lodged in the feed
chute, use the food pusher
provided or another piece
of fruit or vegetable to push
it down. Turn the motor o
and ensure that all moving
parts have stopped before
disassembling the juicer to
remove the remaining pulp.
• Do not use the juicer if the
rotating sieve is damaged.
• Do not use the juicer without
the pulp basin and basin
lid attached to the motor
base. Please see assembly
instructions for proper
placement.
• Do not modify the plug in any
way. This juicer has a polarized
plug. To reduce the risk of
electric shock, this plug will fit
in a polarized outlet only one
way. If the plug does not fit fully
in the outlet, reverse the plug.
If it still does not fit, contact a
qualified electrician.
ADDITIONAL
SAFEGUARDS
Remove and safely
discard any packaging
material or promotional
labels before using the
juicer for the first time.
To eliminate a choking
hazard for young children,
remove and safely discard
the protective cover fitted to
the power plug of this juicer.
Do not touch the small
cutting blades/teeth on the
bottom/ base of the sieve.
BLADES ARE SHARP! HANDLE
WITH EXTREME CARE!
Keep fingers away from the
sharp blade in the feed chute.
WARNING!