Warranty

1514
Twist pitcher counterclockwise
and lift o the motor base.
Pour and enjoy!
If the ingredients stick to
the side of the pitcher, stop
the appliance by pressing
POWER and wait for
the blade to stop turning.
Then remove the pitcher
lid and use the tamper to
dislodge the ingredients.
When finished, replace the
lid and continue blending.
if the ingredients continue
to stick, consider adding a
little more liquid.
6
Plug the power cord into
an electrical outlet and
press POWER to turn on
the blender.
8
10
LOW
7
To start blending, select
your speed on the blending
control panel.
NOTE: Proceed to the blending
control panel chart on page 16 for
speed definitions.
CAUTION: Do not use any
apparatus other than the
tamper to push ingredients
toward the blade. The tamper
is specifically designed not to
come in contact with the blade.
Spatulas, spoons and other
tools are long enough to reach
the blade, which may result
in damage to the machine,
damage to property, and/or
possible injury.
NOTE: If you need to add
additional ingredients while
blending, switch the setting to
LOW and remove the vented
lid cap from your pitcher lid,
leaving the lid attached. Add
ingredients through the hole
in the top of the lid, followed
by the tamper if necessary.
Replace the vented lid cap, then
increase to your desired speed.
DO NOT attempt to add items
through the vent hole when
blending hot ingredients.
Press POWER to turn o
the unit completely.
When you have reached
your desired consistency,
stop the appliance by
pressing POWER
or the speed you selected
and wait for the blades to
stop turning.
WARNING: Blades are sharp. Never
insert your hands into the pitcher.
9
10