Warranty

1918
Care & maintenance.
Replacement parts.
To order additional parts and accessories, please visit our website
at nutribullet.com/shop/accessories or feel free to contact
customer service: 1.800.523.5993.
• If necessary, you may use
a small brush to scrub the
actuator system area to
ensure it’s clean.
WARNING: Never submerge
the motor base in water.
NUTRIBULLET
®
PITCHER:
WARNING: Blades are sharp!
Use caution when cleaning
the pitcher.
• The pitcher is dishwasher-
safe. We recommend rinsing
and briefly scrubbing it with
a dish brush to remove any
remaining debris before
placing in the dishwasher.
NEVER use the sanitize cycle
to wash the pitcher — heat
this high can warp the plastic.
• If preferred, hand-wash the
pitcher with soap and water.
Stuck-on ingredients might
require extra scrubbing from
a dish brush or sponge.
• Regularly check the
structure of the pitcher and
twisting threads for cracking,
crazing, or breakage.
If damaged, replace
immediately to prevent
possible personal injury.
Here’s how to clean
the NutriBullet
®
:
STEP 1:
The most important thing —
ALWAYS POWER OFF THE UNIT
and UNPLUG the motor base
from the power outlet when it
is not in use. Do not attempt to
handle the appliance until all
parts have stopped moving!
This includes during assembly
and disassembly, while
changing accessories during
cleaning, and any time you
leave the machine unattended.
MOTOR BASE:
• To avoid risk of injury, NEVER
attempt to clean the actuator
system on the motor base
while the NutriBullet
®
Blender
is plugged in.
• Do not attempt to remove any
pieces from the motor base.
• Use a sponge or dish cloth
dampened with warm soapy
water to wipe down the
motor base until clean.
• To clean leakage residue
from the motor base, wipe
with a damp sponge and
warm water.
• NEVER USE A PITCHER
THAT DOES NOT PROPERLY
ALIGN WITH THE BLADE.
Doing so may cause the
pitcher and motor base to
separate, exposing the
blade assembly and
potentially causing severe
personal injury.
TAMPER
• Always hand-wash the
tamper with soap and water.
Stuck-on ingredients might
require extra scrubbing from
a dish brush or sponge.
STUBBORN CLEAN UP:
If ingredients dry inside the
NutriBullet
®
Blender, fill your
vessel with water to the liquid
MAX line and add 1-2 drops of
dish soap. Attach the pitcher lid
with the vented lid cap inserted,
and place the pitcher on the
motor base. Blend on LOW
for 20-30 seconds; this should
loosen any remaining debris.
How to store:
Store the NutriBullet
®
pitcher
upright with the pitcher lid
secured on top. Do not place
anything on top of the pitcher
lid. Store remaining pieces in a
safe place where they will not
be damaged and won’t
cause harm.