Use and Care Manual

1 Fill the Water Reservoir.
Before brewing, ensure
there’s enough water in the
Water Reservoir. To add
water, detach it from the
Unit Base by positioning
your fingers under the top
lip and pulling upwards.
At your sink, fill the Water
Reservoir to the MAX fill
line. Then reattach it to the
Unit Base, ensuring the lid
and Water Reservoir base
are secured tightly.
WARNING: Be careful not to
overfill the Water Reservoir.
2 Place the Carafe on top of
the Unit Base, resting on
the heat plate.
3 Access the Pod + Carafe Brew
Area. Place your hands on
the Top Ring Handle and pull
up until the lid is fully open.
Carafe brewing.
Brew a pot of your favorite ground blend using a filter for a classic
coee experience.
Accessories needed: Brew Basket, Gold Tone Filter, and
Coee Ground Scoop.
4 Insert the Brew Basket into
the Pod + Carafe Brew Area.
Then add your Gold Tone
Filter to the Brew Basket.
Use the Coee Ground
Scoop to measure the
appropriate amount of coee
grounds into your filter.
NOTE: Reference page 25 for more
information on how to properly
measure the amount of grounds for
the carafe size you’re brewing.
5 Close the Pod + Carafe
Brew Area. Pull the Top Ring
Handle down to close. Once
secured, it will click. The
brew cycle will not begin
unless this lid is fully closed.
NOTE: The right side of the control
panel (“Carafe”) will illuminate and
display the 3 carafe sizes — 6, 9 or
12 cups.
2322