Owner Manual

54
from the container, resulting
in possible personal injury
and/or property damage.
If the sealed NutriBullet
®
cups are warm to the touch,
power o your machine
and allow the vessel to cool
for fifteen minutes or more.
Allow contents to settle
before slowly releasing the
cup from the motor base.
With the NutriBullet
®
cup,
pointed away from your face
and body, slowly unscrew the
easy-twist extractor blade
to gently release any
residual pressure.
If you need to blend for
longer than one minute,
blend for 1-minute intervals.
After each 1-minute interval,
allow the motor base to shut
o completely and wait at
least one minute before
starting the next cycle. Do
not run for more than 3
consecutive 1-minute intervals
to prevent the contents from
overheating. Allow contents
to settle for 2-3 minutes after
the third blending cycle to
prevent overheating and
buildup of pressure.
Sugar in fruits and vegetables
can ferment over time,
releasing gases that cause
pressure to build up in a
sealed NutriBullet
®
cup. Do
not store any smoothies or
blended mixtures in vessels
sealed with the easy-twist
extractor blade. If you will
not consume your smoothie
immediately, remove the
easy-twist extractor blade
and cover your NutriBullet
®
cup with plastic wrap before
refrigerating. If your smoothie
or blended mixture was
made in the pitcher, transfer
to another storage container
before refrigerating. Never
store any blended mixture in
a sealed cup unrefrigerated,
or for any prolonged period
of time; contents will spoil and
ferment, producing gases that
might cause eruption.
Never blend carbonated
liquids, reactive, or
eervescing ingredients
(e.g., baking soda, baking
powder, vinegar, cirtric acid,
yeast, etc.). Pressure from
released gases can cause a
sealed blending container to
burst or separate, resulting
in possible injury and/or
property damage.
BLENDING WITH THE PITCHER:
Use extra caution when
blending hot liquids in
the pitcher.
Never turn the power on
while using the pitcher
without the vented lid cap
inserted and locked into the
pitcher lid, as ingredients
can splash, and if hot or
warm, could potentially
WARNING! WARNING!
cause thermal injury and/or
property damage.
Steam and splattering
ingredients can escape
through the pitcher lid,
potentially scalding and/
or burning the user. NEVER
blend hot liquids in your
pitcher without the pitcher
lid and vented lid cap locked
into the pitcher lid and
attached. The vented lid cap
allows steam and pressure
to escape, while guarding
against excess splashing.
NEVER blend hot liquids in
your NutriBullet
®
cups or any
other sealed vessel.
When blending hot liquids,
add liquid and solid
ingredients to your pitcher
below their respective MAX
lines. Attach the pitcher
lid with the vented lid cap
inserted and locked. Press
POWER and begin blending
on the LOW setting. Once
ingredients are integrated,
increase speed as needed.
If the NutriBullet
®
blends
for longer than one minute,
friction from the blades can
cause ingredients to heat and
generate internal pressure
inside the vessel. If a blending
vessel becomes warm to the
touch, turn o the machine
and allow the vessel to cool
completely before carefully
opening, pointed away from
your body to avoid injury.
BLADE SAFETY
Never store any easy-twist
extractor blade in the
motor base unattached
to a NutriBullet
®
cup. An
exposed blade can present
a laceration hazard.
Blades are sharp! Handle
carefully. Use care when
handling any blade. To
avoid laceration injury, do
not handle or touch any
blade edge.
AVOID CONTACT WITH
MOVING PARTS! Keep hands
and utensils out of and away
from blades while blending
food to reduce the risk of
severe personal injury.
• TO REDUCE THE RISK OF
PERSONAL INJURY OR
PROPERTY DAMAGE, make
sure the easy-twist extractor
blade is securely twisted
(hand-tightened) onto the
NutriBullet
®
blending vessel
before placing it on the
motor base and operating
the NutriBullet
®
Select. Check
to make sure the easy-twist
extractor blade is aligned
properly before placing it on
the motor base and operating
your NutriBullet
®
Select.
• After blending, turn the power
blending vessel/easy-twist
extractor blade assembly
from the motor base until
the motor comes to a full
stop and the unit powers
WARNING!
WARNING!