User Manual

10
ALWAYS UNPLUG THE NUTRIBULLET WHEN CLEANING OR ASSEMBLING.
• NEVER SUBMERGE THE POWER BASE IN WATER OR PLACE IT IN THE
DISHWASHER.
• RINSE BLADES (AND CUP) IMMEDIATELY AFTER USE TO PREVENT DEBRIS
FROM DRYING AND STICKING TO VESSELS – IF NECESSARY, USE A DISH
BRUSH TO LOOSEN ANY DEBRIS.
• HAND WASH ONLY WITH MILD DISH SOAP AND WARM WATER (NOT HOT).
• DRY IMMEDIATELY.
• FOR TOUGH DEBRIS, FILL THE CUP
½ FULL WITH WARM (NOT HOT),
MILD SOAPY WATER. THEN, SIMPLY TWIST ON THE BLADE, POP IT ON THE
BASE AND GIVE IT A RUN FOR 30- 45 SECONDS. FOLLOW UP WITH A QUICK
BRUSH.
• DO NOT PUT THE BLADES IN THE DISHWASHER AS ELEVATED
TEMPER ATURES CAN DAMAGE GASKETS. SIMPLY HAND WASH WITH WARM,
MILD SOAPY WATER.
• WHEN WASHING BLADE, DO NOT ATTEMPT TO REMOVE THE GASKET
RING. SIMPLY HAND WASH THE BLADES IN WARM, MILD SOAPY WATER.
IF NECESSARY, USE A DISH BRUSH TO LOOSEN DEBRIS. IF DESIRED, THE
BLADE AND GASKET MAY BE FURTHER DISINFECTED BY RINSING IN A 10%
DILUTED SOLUTION OF WHITE VINEGAR AND WATER OR USE LEMON JUICE.
ATTEMPTED REMOVAL OF THE GASKET MAY PERMANENTLY DAMAGE THE
BLADE CONFIGURATION AND CAUSE LEAKAGE.
• IF IN TIME, A GASKET BECOMES LOOSE OR DAMAGED WITH USE, PLEASE
CONTACT CUSTOMER SERVICE FOR A REPLACEMENT BLADE HOLDER AT
WWW.BULLETBRANDS.AU OR
WWW.BULLETBRANDS.CO.NZ
BLADES AND CUPS ARE CONSUMABLE PARTS
AND WILL REQUIRE REPLACEMENT.
WE RECOMMEND 6 MONTHS ON BLADES AND
CUPS AS REQUIRED.
CLEANING
THE NUTRIBULLET