Use and Care Manual

12
NOTE:
Always use the two larger
holes (finger holes) to handle the
blade discs.
Using the food processor:
disc
2 Carefully place the blade
disc onto the bowl shaft, with
the desired side facing UP.
1 Place the work bowl on a
clean, dry, flat surface, like
a countertop.
NOTE: The lid must be locked securely
in place, or the motor will not run.
3 Place the bowl lid on top of
the bowl and turn it clockwise
to lock it into place. NEVER
place hands, fingers, utensils,
or any non-food items into
the feed chute.