Instructions / Assembly

ZN80ML n ZN110ML Installation Guide
Page 3
1
2
3
4
Parts Bag holds
Knockout Plate
and six (6)
screws
Remove
Instruction
Sheet
Remove CFL Bulbs
from protective packaging
Punch out Mask from
packaging. See Step 6.
New Construction Installation
Tools needed
• PowerscrewdriverwithaPhillipsbit
• Phillipsscrewdriver
• Flatheadscrewdriver
• Pliers
• Wireinsulationstripper
• Wirecutter
Materials needed
• 6"roundmetalductingrecommendedforbestperformance.
Use of other ducting is acceptable but may impact performance.
• Roofcaporwallcap(built-indamperrecommended)
• Tapetosealductconnections
• Electricalwiringandsuppliesperlocalcoderequirements
• 4W(max.)C7-typenightlightbulb
1
Remove Packaging
2
Install
Mounting
Frame