Quick Start Manual

XN110H Installation Guide
Page 3
1
2
3
4
New Construction Installation
Tools needed
• PowerscrewdriverwithaPhillipsbit
• Phillipsscrewdriver
• Flatheadscrewdriver
• Pliers
• Wireinsulationstripper
• Wirecutter
Materials needed
• 6"roundmetalductingrecommendedforbestperformance.
Use of other ducting is acceptable but may impact performance.
• Roofcaporwallcap(built-indamperrecommended)
• Tapetosealductconnections
• Electricalwiringandsuppliesperlocalcoderequirements
1
Remove Packaging
2
Install
Mounting
Frame
Parts Bag holds
Knockout Plate
and six (6)
screws
Remove
Instruction
Sheet
Punch out Mask from
packaging. See Step 6.