Installation Guide

XN110H Installation Guide
Page 10
2
1
4
5
6
3
Retrofit Installation
11
Install Knockout Plate, Connect Wires and Reinstall Wiring Panel
Screw from
Parts Bag
Attach cable clamp to Knockout
Plate. Knockout Plate mounts to
inside of Housing and may be
oriented as
desired.
Connect
wires
Screw set
aside in
Step 6
• Use proper UL-approved connectors to secure wiring to the Knockout Plate provided in Parts Bag.
• Connect wires as shown in wiring diagram.
14/2
GRD
WHT
BLK
GRD
WHT
BLK
SENSOR/
CONTROL
FAN
SENSOR/
CONTROL
BLK
WHT
BRN
BLK
RED
ORG
120 VAC
LINE IN
SENSOR
CONTROL*
KNOCKOUT
PLATE
RECEPTACLES
120 VAC
LINE IN
SWITCH BOX
BLACK
WHITE
*
purchase separately
GROUND
(green or bare)
ORANGERED
BROWN
• See OPERATION section on page
12 for details.
• SENSOR/CONTROL switch allows
humidity control to be turned on for
automatic operation and off for fan
cleaning and maintenance purposes.
• Toggle mode can be used to manually
turn fan on.
• SENSOR/CONTROL switch may be
located where it is not easily accessed
for everyday usage; it may need to be
labeled and located where it can’t be
turned on without being seen from
fan to comply with local and national
codes.