Specification

SPECIFICATION SHEET
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
40E 99043475A
ALLURE
TM
RANGE HOOD
MODELS WS1, WS2, & WS3
Meeting customer demands for a contemporary styled
range hood that is 50% quieter than average hoods, is
easy to clean, and brightly lights the cooktop.
FEATURES
•
Clean, sleek appearance
•
Durable, baked-on polyester finish paint or brushed finish
stainless steel
•
Over 50% quieter than the average range hood
•
Exclusive DuPont Teflon
®
, non-stick bottom cover for easy
cleaning (WS2 & WS3)
•
Large, full filter design - dishwasher-safe for easy cleaning
•
Dual halogen lights provide focused lighting for unmatched
cooktop visibility as well as a soft, night-time level (lamps not
included)
•
Axial blade (WS1) or centrifugal blower (WS2 & WS3) provides
increased performance and quieter operation.
•
Flush-mounted controls
•
Versatile design allows for 3¼" x 10", 7" round, or non-ducted
discharges without re-positioning blower
•
Adjustable duct connectors - accommodate off-center duct-
work
•
CleanSense™ charcoal filters change color when replace-
ment is necessary (for non-ducted installations - purchase
separately)
•
Available in 30", 36", or 42" widths in White, Biscuit, Almond,
Black, and Stainless Steel
•
Bi-lingual carton graphics and installation manual (English/
Spanish) (English/French Canadian in Canada)
•
Heat Sentry™ - automatically turns blower to high (WS2), on
or higher (WS3) when excess cooking heat is detected
TYPICAL SPECIFICATION
Range hood shall be NuTone WS1 (WS2) (WS3) Series.
Unit will have clean, contoured appearance with no sharp edges.
Finish to be baked-on polyester paint (matte finish stainless steel).
It must have a fully-enclosed bottom and dishwasher-safe, full
filters.
Hood to be convertible between 3¼" x 10" and 7" round ducted
(using two washable aluminum filters) as well as non-ducted (using
two CleanSense™ filters - must be purchased separately). Duct
connectors must be adjustable to accommodate off-center ductwork.
Range hood to have an axial blade (centrifugal blower) and twin, 50-
watt (max.) halogen flood lights. Blower and lights shall be operated
using a specially-designed, adjustable control with 2-speed rocker
(3-speed electronic push button) (4-speed electronic, with delayed
"off" and filter reminder).
Air delivery shall be no less than 220 cfm (WS1), 300 cfm (WS2),
430 cfm (WS3). Sound level to be no greater than 1.5 Sones/100 cfm
- 5.0 Sones/220 cfm (WS1); 0.9 Sones/100 cfm - 4.5 Sones/300 cfm
(WS2); 0.4 Sones/100 cfm - 4.5 Sones/300 cfm - 8.0 Sones/430 cfm
in "Boost" mode (WS3). Air and sound ratings to be certified by HVI.
Unit shall be U.L. and
C
U.L. listed.
NuTone, Inc., 4820 Red Bank Road, Cincinnati, OH 45227 (1-888-336-6151)
Broan-NuTone Canada, Inc., 1140 Tristar Drive, Mississauga, Ontario, L5T 1H9 (1-888-882-7626)
WS1 WS2 WS3
Volts 120 120 120
HZ 60 60 60
Amps 1.8 2.0 3.0
Max. cfm 220 300 300*
Sones (norm.) 1.5 0.9 0.4*
Sones (high) 5.0 4.5 4.5
Controls 2-sp rocker 3-sp electronic 4-sp electronic
Halogen Flood Light PAR20
†
PAR20
†
PAR20
†
Charcoal Filter BPSF
‡
BPSF
‡
BPSF
‡
DuPont Teflon
®
No Yes Yes
Heat Sentry™ No Yes Yes
* 430 cfm & 8.0 sones in Boost mode (WS3 only).
†
2 bulbs req. (not included).
‡
Purchase separately for non-ducted installation.
SPECIFICATIONS MODEL
HVI-2100 CERTIFIED
RATINGS comply with
new testing technologies and procedures prescribed by the Home Ventilating
Institute, for off-the-shelf products, as they are available to consumers.
Product performance is rated at 0.1 in. static pressure, based on tests
conducted in AMCA’s state-of-the-art test laboratory. Sones are a measure
of humanly-perceived loudness, based on laboratory measurements.
Teflon
®
is a registered
trademark of DuPont.
LISTED